Airtac SE80 Standard Cylinder SE80BX80SH
The AirTAC Airtac SE80 Standard Cylinder SE80BX80SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80BX80SH
The AirTAC SE80BX80SH is a double-acting single-rod ISO 15552 profile cylinder engineered for severe environments. It generates 2513 N of push force at 0.5 MPa, making it a robust choice for heavy actuation. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This specific configuration pairs a SUS304 stainless steel rod for washdown durability with a high-temperature Viton (FKM) seal, extending the operating range from -20 C up to 150 C. A built-in magnet enables position detection via CMSE reed or DMSE electronic sensors, while the field-adjustable pneumatic cushioning at both ends allows precise deceleration tuning to eliminate hard end-stop impacts.
Airtac SE80 Standard Cylinder SE80BX80SH Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80BX80SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80BX80SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80BX80SH Is Used
Palletizer Hot-End Pusher
Drives carton forming arms in high-temperature packaging lines, utilizing the 2513 N push force and 150 C Viton seal to withstand ambient heat.
Chemical Washdown Gate
Actuates diverter valves in food and chemical washdown zones, relying on the SUS304 stainless steel rod to resist corrosion and pitting.
Press Ejection Mechanism
Ejects formed metal parts from hydraulic presses, using the adjustable end cushions to soften the 80 mm stroke impact at high cycle rates.
Is the Airtac SE80 Standard Cylinder SE80BX80SH the Right Cylinder?
If your application requires slightly less force, the 63 mm bore provides 1559 N of push at 0.5 MPa; stepping up to the 100 mm bore yields 3927 N. Keep in mind that a standard SE cylinder relies on live air pressure to hold its load—if air is lost or the valve centers, the piston will drift, so consider an external rod lock for fail-safe holding. Because this is an 80 mm bore with an 80 mm stroke, side-load bending stress on the rod bearing is minimal, though any long unsupported stroke still warrants an external guide. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 profile cylinders, matching the PT3/8 port, M20x1.5 rod thread, and standard mounting footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80BX80SH FAQ
At 0.5 MPa, the SE80BX80SH delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80BX80SH is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders. It uses a Viton (FKM) seal to operate in temperatures up to 150 C, and the built-in magnet supports CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80BX80SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.