Airtac SE80 Standard Cylinder SE80X100SFB
The AirTAC Airtac SE80 Standard Cylinder SE80X100SFB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X100SFB
The AirTAC SE80X100SFB is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty automation. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 100 mm stroke. The rear flange (FB) mounting ensures rigid axial fixation for high-inertia loads.
This model features a built-in magnet (S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. The square extruded aluminum barrel eliminates external tie rods, creating a flush, corrosion-resistant profile that simplifies sensor placement along three integrated grooves.
Airtac SE80 Standard Cylinder SE80X100SFB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X100SFB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X100SFB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X100SFB Is Used
Press Die Ejection
Provides 2513 N of push force at 0.5 MPa to eject stamped metal sheets from heavy press dies, using the rigid FB rear flange to absorb high axial shock.
Pallet Diverting
Uses the 100 mm stroke to push heavy pallets onto secondary conveyor lanes, while the integrated magnet enables DMSE sensors to confirm divert completion.
Corrugated Box Sealing
Drives the folding and sealing heads on automated carton erecting lines, where the adjustable cushion gently slows the 25 mm rod before it impacts the mechanical stops.
Is the Airtac SE80 Standard Cylinder SE80X100SFB the Right Cylinder?
When sizing this 80 mm bore actuator, compare its 2513 N push force at 0.5 MPa against adjacent bores: step down to a 63 mm cylinder for 1559 N, or move up to a 100 mm bore for 3927 N if your system requires greater thrust. This SE80X100SFB is dimensionally interchangeable per ISO 15552, allowing drop-in replacement for other standard profile cylinders using identical mounting hardware.
Note that a plain double-acting cylinder drifts when air pressure is lost or the valve is centered; if your application must hold a vertical load safely without live pressure, integrate an external rod lock or pilot-operated check valve. The field-adjustable air cushion at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts at operating speeds up to 800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X100SFB FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
Yes, the SE80X100SFB is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 80 mm bore, 100 mm stroke, PT3/8 port, and FB rear flange mounting dimensions exactly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X100SFB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.