Airtac SE80 Standard Cylinder SE80X1200
The AirTAC Airtac SE80 Standard Cylinder SE80X1200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1200
The AirTAC SE80X1200 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa and a maximum thrust of 513 kgf. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 80 mm bore unit features a PT3/8 port and a 25 mm piston rod engineered for high side-load resilience. Because this specific SKU lacks the -S magnet code, it arrives without built-in position sensing; you can deploy it in purely mechanical sequences or machine the body later if sensor tracking becomes necessary.
Airtac SE80 Standard Cylinder SE80X1200 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1200 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1200
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1200 Is Used
Pallet Transfer Rejecter
Uses the 1200 mm stroke to push heavy Euro pallets off a high-speed packaging line, leveraging the 2513 N push force at 0.5 MPa to overcome sliding friction.
Automated Press Ejection
Ejects stamped metal parts from a 200-ton hydraulic press, where the 80 mm bore provides enough immediate energy to clear the die before the next cycle.
Vertical Lift Gate Actuation
Drives a 1.2 meter heavy-duty loading dock gate, relying on the 513 kgf maximum thrust to hoist the dead weight while external guides absorb the lateral load.
Is the Airtac SE80 Standard Cylinder SE80X1200 the Right Cylinder?
Selecting this 80 mm bore makes sense when you need heavy thrust beyond the 63 mm class (1559 N push at 0.5 MPa) but want to avoid the larger fluid demand of a 100 mm bore (3927 N push at 0.5 MPa). With a 1200 mm stroke, the unsupported piston rod is highly susceptible to bending under lateral stress—always pair this cylinder with an external linear guide to prevent premature rod-bearing wear.
As a standard ISO 15552 profile cylinder, it serves as a drop-in replacement for any matching 80x1200 footprint, utilizing standard FA, LB, or TC mounting accessories and PT3/8 air connections. Remember that the field-adjustable air cushions at both ends only decelerate the piston near stroke end; they do not lock the rod, so a BSE rod lock is required if you must hold a vertical load safely without live air pressure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1200 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum thrust of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE80X1200 is dimensionally interchangeable per ISO 15552, meaning it shares the exact mounting footprint and PT3/8 port locations of other standard profile cylinders. You can swap it directly using existing FA, FB, or TC mounting hardware without re-machining your plate.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.