Airtac SE80 Standard Cylinder SE80X130SFA
The AirTAC Airtac SE80 Standard Cylinder SE80X130SFA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X130SFA
The AirTAC SE80X130SFA is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic actuation. Delivering 2513 N of push force at 0.5 MPa (3518 N at 0.7 MPa), it utilizes an 80 mm bore and a 130 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a smoother, more corrosion-resistant exterior that mounts flush against machine frames while simplifying cleaning procedures in debris-prone environments.
This specific configuration includes an FA front flange mounting interface for rigid front-end attachment, a PT3/8 port, and a built-in magnet (-S) compatible with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable air cushions at both ends allow technicians to tune end-cap deceleration, softening hard mechanical stops when moving heavy loads at high velocities.
Airtac SE80 Standard Cylinder SE80X130SFA Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X130SFA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X130SFA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X130SFA Is Used
Press Die Ejection
Provides the 2513 N push force required to eject heavy stamped metal panels from progressive die sets, using the adjustable cushion to halt the 130 mm stroke smoothly.
Pallet Flap Folding
Utilizes the FA front flange mount to rigidly secure the cylinder on corrugated box packers, driving folding mechanisms with reliable 3518 N force at 0.7 MPa.
Beverage Line Diverting
Leverages the built-in magnet with DMSE sensors to confirm stroke position for high-speed lane diverts on bottle filling conveyors, handling substantial guide loads.
Is the Airtac SE80 Standard Cylinder SE80X130SFA the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application requires the 2513 N push force at 0.5 MPa. If your load demands less force, stepping down to the 63 mm bore yields 1559 N push, whereas upgrading to the 100 mm bore provides 3927 N push for heavier masses. Keep in mind that a standard double-acting SE cylinder relies on continuous air pressure to maintain its position; it will drift if air is lost or the valve is centered, so a BSE rod lock variant is required for true fail-safe holding.
This model features an FA front flange for robust axial load support and a -S magnet for position sensing. As a dimensionally interchangeable ISO 15552 unit, it serves as a drop-in replacement for other ISO 15552 profile cylinders, sharing standard mounting hardware and envelope dimensions. Since the 130 mm stroke is below the 300 mm threshold, side-load stress on the M20x1.5 rod bearing is minimal, though long unsupported loads should still use an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X130SFA FAQ
This double-acting 80 mm bore cylinder generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It has a 130 mm stroke, a PT3/8 port, and operates at speeds from 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 and serves as a drop-in replacement for other profile cylinders with matching front flange (FA) hardware. It features field-adjustable air cushions at both ends that decelerate the piston near the stroke ends, which can be tuned via a screw to prevent hard mechanical impacts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X130SFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.