Airtac SE80 Standard Cylinder SE80X135
The AirTAC Airtac SE80 Standard Cylinder SE80X135 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 135mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke135 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X135
The AirTAC SE80X135 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Because it uses an extruded aluminum barrel without external tie rods, the body is highly compact, corrosion-resistant, and easy to mount flush against machine frames. This 80 mm bore unit features a PT3/8 port and a 25 mm hard-chrome plated rod.
Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration via a screw, softening hard impacts when cycling at speeds up to 800 mm/s. This SKU is configured without a built-in magnet, meaning it does not support CMSE or DMSE position sensors out of the box. The 36 mm cushion length ensures smooth stops even under heavy loads.
Airtac SE80 Standard Cylinder SE80X135 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X135 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X135
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X135 Is Used
Palletizer Case Pusher
Drives large format cardboard cartons onto a palletizer infeed chain, utilizing the 2513 N push force to overcome box weight and friction at 800 mm/s.
Press Brake Material Stop
Acts as an adjustable back-gauge stop in a sheet metal press brake, where the 2268 N pull force and 135 mm stroke accurately position steel panels for bending.
Heavy Crate Diverting Arm
Mounts on a roller conveyor to push filled beverage crates to a secondary packaging line, relying on the 36 mm cushion length to soften the end-of-stroke impact.
Is the Airtac SE80 Standard Cylinder SE80X135 the Right Cylinder?
If you are sizing this 80 mm bore actuator, stepping down to a 63 mm cylinder reduces the 0.5 MPa push to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. This SE80X135 provides a middle ground for medium-heavy handling. Note that a standard double-acting cylinder does not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider a BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 actuators, utilizing the same mounting interface and PT3/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X135 FAQ
This 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 3518 N, and the maximum push force is 513 kgf at 1.0 MPa.
Yes, the SE80X135 is dimensionally interchangeable per ISO 15552 standards. You can drop it in to replace other ISO 15552 profile cylinders using the same mounting hardware and PT3/8 porting without frame modifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X135
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.