Airtac SE80 Standard Cylinder SE80X145S
The AirTAC Airtac SE80 Standard Cylinder SE80X145S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 145mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke145 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X145S
The AirTAC SE80X145S is a double-acting, single-rod ISO 15552 profile cylinder delivering 2513 N push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and reduces contamination traps in tight machinery layouts.
Equipped with a built-in magnet (-S), this 80mm bore unit supports AirTAC CMSE reed and DMSE electronic position sensors along three integrated side grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s actuation.
Airtac SE80 Standard Cylinder SE80X145S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X145S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X145S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X145S Is Used
Palletizer Case Pusher
Provides the 2513 N push force needed to index filled cartons onto wooden pallets, using the 145mm stroke to clear the conveyor path during retraction.
Press Brake Backgauge
Positions sheet metal stops with precision using DMSE electronic sensors on the magnetic piston, relying on the 36mm cushion to absorb rapid reversals.
Injection Mold Ejector
Drives heavy mold cores out of vertical presses, leveraging the 25mm rod thread (M20x1.5) to secure robust fixture attachments.
Is the Airtac SE80 Standard Cylinder SE80X145S the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80mm bore steps up from the 63mm class (1559 N) for heavier payloads or down from the 100mm class (3927 N) when saving space. For stroke lengths of 145mm, the 25mm piston rod handles moderate side loading, though an external guide is recommended for heavy offset loads. As a dimensionally interchangeable ISO 15552 cylinder, it drops in for retrofits using standard PT3/8 ports and LB or FA mounting accessories. Note that the adjustable cushion only decelerates the piston near stroke end; it does not hold a load if air pressure drops.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X145S FAQ
At 0.5 MPa, the SE80X145S generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum allowable push force is 513 kgf at 1.0 MPa.
Yes. The SE80X145S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint, PT3/8 port locations, and 25mm rod-end thread (M20x1.5) of comparable profile cylinders, allowing a direct drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X145S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.