Airtac SE80 Standard Cylinder SE80X1600
The AirTAC Airtac SE80 Standard Cylinder SE80X1600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 1600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X1600
The AirTAC SE80X1600 is a double-acting, single-rod ISO 15552 profile cylinder engineered for long-stroke actuation. It delivers a robust 2513 N push at 0.5 MPa, utilizing a Ø25 mm piston rod and PT3/8 ports. Because the 1600 mm stroke exceeds the standard 1500 mm maximum, this unit is provided as a made-to-order configuration.
The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies bracket installation. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycles. Note that this specific SKU lacks a built-in magnet, so it does not directly support CMSE or DMSE position sensing without modification.
Airtac SE80 Standard Cylinder SE80X1600 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X1600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X1600
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×1600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X1600 Is Used
Automated Pallet Transfer
Drives large-format pallets along extended conveying lines, using its 2513 N push force and 1600 mm stroke to index heavy goods between robotic packaging cells.
Textile Beam Lifting
Raises and lowers heavy textile beams on weaving machines, where the long stroke accommodates deep vertical material feeds and the robust 80 mm bore handles substantial payload weight.
Press Feed Ejection
Actuates long-stroke ejection arms in metal stamping presses, pushing formed sheet metal panels clear of the lower die across a wide 1600 mm bed.
Is the Airtac SE80 Standard Cylinder SE80X1600 the Right Cylinder?
Selecting this 80 mm bore yields 2513 N of thrust at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore provides 1559 N of push; conversely, moving up to the 100 mm bore offers 3927 N. At 1600 mm of stroke, the unsupported piston rod is highly susceptible to bending under side loads, making an external guide rail strictly necessary to prevent premature rod-bearing wear.
This model serves as a dimensionally interchangeable drop-in replacement for any ISO 15552 cylinder, matching standard mounting accessories and port locations. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it does not function as a locking device. If the machinery must hold a vertical load safely without continuous air pressure, integrate an external rod lock like the BSE series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X1600 FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE80X1600 is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a drop-in replacement for other profile cylinders using standard mounting hardware. Note that this specific SKU lacks a position-sensing magnet, so it cannot host CMSE or DMSE switches without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X1600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.