Airtac SE80 Standard Cylinder SE80X160SFTC
The AirTAC Airtac SE80 Standard Cylinder SE80X160SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X160SFTC
The AirTAC SE80X160SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa), utilizing an 80 mm bore and a 160 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This specific configuration includes a built-in position magnet for CMSE reed and DMSE electronic sensors, alongside an FTC centre trunnion mounting style. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, absorbing kinetic energy smoothly rather than relying on fixed rubber bumpers.
Airtac SE80 Standard Cylinder SE80X160SFTC Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X160SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X160SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X160SFTC Is Used
Injection Mold Clamping
Provides 2513 N of extend force at 0.5 MPa to secure heavy injection mold halves, utilizing the FTC trunnion mount to accommodate slight angular misalignments during the press cycle.
Pallet Diverting Arms
Actuates heavy routing gates on high-throughput packaging conveyors, where the 160 mm stroke moves pallets laterally and the built-in magnet confirms gate position via DMSE sensors.
Heavy Stamping Press Feed
Drives the raw material feeder on an automotive stamping line, using its adjustable end cushions to decelerate the 80 mm bore smoothly despite high cycling speeds.
Is the Airtac SE80 Standard Cylinder SE80X160SFTC the Right Cylinder?
Selecting this 80 mm bore makes sense when an application requires substantial thrust that a 63 mm cylinder cannot provide; stepping down to the 63 mm bore drops the 0.5 MPa push force to 1559 N. If you need even greater power, moving up to a 100 mm bore increases that push figure to 3927 N. Because this model carries an FTC trunnion mount, it is ideal for pivoting loads requiring a central hinge point.
As a standard double-acting cylinder, it relies on continuous air pressure to maintain its position; if air is lost or the valve centers, the piston will drift and cannot hold a load. For suspended or gravity-loaded applications requiring static holding, integrate an external rod lock like the AirTAC BSE series. Dimensionally interchangeable per ISO 15552, this unit drops directly into existing footprints using standard mounting hardware and PT3/8 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X160SFTC FAQ
This 80 mm bore cylinder provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X160SFTC is dimensionally interchangeable per ISO 15552. It shares the standardized mounting interface, PT3/8 ports, and M20x1.5 rod thread, allowing it to serve as a direct drop-in replacement for other ISO 15552 profile cylinders without altering the machine layout.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X160SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.