Airtac SE80 Standard Cylinder SE80X170
The AirTAC Airtac SE80 Standard Cylinder SE80X170 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke170 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X170
The AirTAC SE80X170 is a double-acting single-rod ISO 15552 profile cylinder delivering 2513 N push and 2268 N pull at 0.5 MPa. It uses a clean extruded aluminum barrel without external tie rods, making it compact and highly resistant to corrosion while allowing flush mounting on machinery.
This 80 mm bore unit features adjustable pneumatic cushioning at both ends to soften hard end stops at speed. This specific SKU is built without a magnet, so it does not support CMSE or DMSE position sensors out of the box.
Airtac SE80 Standard Cylinder SE80X170 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X170 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X170
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X170 Is Used
Palletizer Case Erector
Uses the 2513 N extend force to fold heavy corrugated cardboard blanks into shipping cartons on a high-speed line.
Press Brake Backgauge
Positions sheet metal accurately with the 2268 N retract force before the upper die descends for bending.
Injection Mold Ejector
Drives the 25 mm rod forward 170 mm to positively strip finished plastic parts off the core before the press opens.
Is the Airtac SE80 Standard Cylinder SE80X170 the Right Cylinder?
If you need less force, the 63 mm bore provides 1559 N push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N. Because this is a plain double-acting cylinder, it will drift if air pressure is lost and cannot hold a load mid-stroke; use a BSE rod lock for safety holding. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement sharing the PT3/8 port and M20x1.5 rod thread. The 170 mm stroke is under the 300 mm side-load threshold, so standard mounting is fine.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X170 FAQ
At 0.5 MPa it provides 2513 N push and 2268 N pull; at 0.7 MPa push is 3518 N. The maximum push is 513 kgf at 1.0 MPa, and operating speed ranges 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 and shares standard mounting hardware. Note this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X170
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.