Airtac SE80 Standard Cylinder SE80X175S
The AirTAC Airtac SE80 Standard Cylinder SE80X175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X175S
The AirTAC SE80X175S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa and up to 513 kgf at 1.0 MPa. Driven by a 25 mm hard-chrome rod with an M20x1.5 thread, it operates at speeds of 30-800 mm/s through a PT3/8 port. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (S option), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard mechanical stops during high-velocity operations without relying on fixed rubber bumpers.
Airtac SE80 Standard Cylinder SE80X175S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X175S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X175S Is Used
CNC Pallet Clamping
Generates 2513 N of push force at 0.5 MPa to secure heavy machining pallets, using the built-in DMSE sensor to confirm clamp engagement before cycle start.
Pallet Diverting Arm
Utilizes the 175 mm stroke and 3518 N push at 0.7 MPa to kick heavy product pallets off a main conveyor line into a secondary packaging lane.
Corrugated Box Sealing
Drives a sealing head with consistent 30-800 mm/s velocity, while the field-adjustable air cushion decelerates the 25 mm rod smoothly to prevent crushing cardboard.
Is the Airtac SE80 Standard Cylinder SE80X175S the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force margins: stepping down to a 63 mm bore drops the 0.5 MPa push to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. Because this is a double-acting cylinder, it relies on continuous live air pressure to hold a load; if air is exhausted or the valve centers, the piston will drift. For fail-safe position holding, pair it with a BSE rod lock variant or an external pilot-operated check valve.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other standard profile cylinders, utilizing identical mounting hardware like FA front flanges or TC center trunnions. The 175 mm stroke is well within the 1500 mm maximum standard limit, but always verify that your rod-end thread M20x1.5 and PT3/8 port match your existing fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X175S FAQ
This 80 mm bore cylinder provides 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It features a PT3/8 air port, a 25 mm rod diameter, and an M20x1.5 rod-end thread.
Yes, it is dimensionally interchangeable with standard ISO 15552 profile cylinders, allowing you to reuse existing mounting brackets. The -S magnet option enables direct mounting of AirTAC CMSE reed switches and DMSE solid-state sensors directly into the barrel's three-sided sensor grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.