Airtac SE80 Standard Cylinder SE80X175STC
The AirTAC Airtac SE80 Standard Cylinder SE80X175STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X175STC
The AirTAC SE80X175STC is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling to a maximum output of 513 kgf at 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while maintaining a standardized ISO 15552 footprint.
This 80 mm bore unit includes a built-in magnet for CMSE reed and DMSE electronic position sensing. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycles. The TC center trunnion mounting provides a pivoting anchor point ideal for articulated mechanisms.
Airtac SE80 Standard Cylinder SE80X175STC Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X175STC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X175STC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X175STC Is Used
Palletizer Flap Control
Manages diverter arms on high-speed palletizing lines, utilizing the 2513 N push force to redirect heavy corrugated containers smoothly.
Press Brake Backgauge
Positions the backgauge stop on sheet metal bending presses, where the TC trunnion accommodates slight angular alignment during rapid 30-800 mm/s positioning.
Injection Mold Ejection
Drives secondary ejection mechanisms for molded plastic parts, benefiting from the adjustable end-cushions to protect sensitive components at stroke limits.
Is the Airtac SE80 Standard Cylinder SE80X175STC the Right Cylinder?
When sizing this 80 mm bore model, consider stepping down to the 63 mm bore (1559 N push at 0.5 MPa) for lighter loads, or up to the 100 mm bore (3927 N push at 0.5 MPa) if your system requires greater thrust. The TC trunnion mount is optimal for applications requiring pivot motion along the stroke axis. Because this is a double-acting cylinder, it cannot hold a load if air pressure drops or the valve is centered; for fail-safe position holding, explore a BSE rod lock variant. The PT3/8 port and M20x1.5 rod thread match standard ISO 15552 hardware for seamless retrofits.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X175STC FAQ
The 80 mm bore SE80X175STC delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. It uses a PT3/8 port and an M20x1.5 rod thread.
Yes, the SE80X175STC is dimensionally interchangeable with any standard ISO 15552 profile cylinder. Its standardized mounting interface and TC trunnion dimensions allow for a drop-in retrofit without modifying existing machine tooling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X175STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.