Airtac SE80 Standard Cylinder SE80X190
The AirTAC Airtac SE80 Standard Cylinder SE80X190 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke190 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X190
The AirTAC SE80X190 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Featuring an 80 mm bore and a 190 mm stroke, it operates reliably between 0.15 and 1.0 MPa with a speed range of 30-800 mm/s. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 interface.
Field-adjustable pneumatic cushioning at both stroke ends allows technicians to precisely tune end-of-travel deceleration via a set screw, softening hard impacts during high-speed operations. This specific SKU is provisioned without a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box. The robust Ø25 mm piston rod with an M20x1.5 end thread handles substantial side loads, and the PT3/8 port ensures high airflow for rapid cycling.
Airtac SE80 Standard Cylinder SE80X190 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X190 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X190
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X190 Is Used
Palletizer Flap Folding
Drives the mechanical arms that fold cardboard flaps on high-speed palletizing lines, utilizing the 2513 N push force to overcome carton stiffness over the 190 mm stroke.
Bottling Line Diverter
Actuates heavy lane-diverter gates on conveyor belts to route filled glass bottles, relying on the adjustable end cushions to prevent slamming at 800 mm/s.
Injection Mold Extraction
Pushes molded plastic parts out of heavy injection machinery, where the 80 mm bore's 2268 N retract force safely extracts the part from the mold cavity.
Is the Airtac SE80 Standard Cylinder SE80X190 the Right Cylinder?
Choosing this 80 mm bore makes sense when your application requires the 2513 N push force at 0.5 MPa. If your load is lighter, stepping down to the 63 mm bore yields 1559 N push, whereas moving up to the 100 mm bore provides 3927 N push for heavier demands. Because this is a standard 190 mm stroke, it serves as a direct dimensionally interchangeable drop-in replacement for other ISO 15552 profile cylinders, sharing identical mounting hardware and footprint. For retrofitting, verify the PT3/8 port and the M20x1.5 rod thread.
Since this model lacks the -S magnet, it cannot host AirTAC CMSE or DMSE electronic switches; if your sequencing requires position feedback, request the SE80X190S variant. Furthermore, a plain SE cylinder will drift and cannot hold a load if air pressure drops or the valve is centered—if static holding is mandatory, integrate an external pilot-operated check valve or pivot to the BSE rod-lock series. At 190 mm stroke the side load is moderate, but always confirm the rod bearing can handle the bending moment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X190 FAQ
At 0.5 MPa, the SE80X190 delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum allowable push force is 513 kgf when operating at the 1.0 MPa pressure limit.
Yes, the SE80X190 is dimensionally interchangeable per ISO 15552 standards, matching the exact mounting footprint and accessory interface of other profile cylinders. Note that this specific unit uses a PT3/8 port and lacks a sensor magnet, so you will need to add the -S option if your sequence control requires CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X190
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.