Airtac SE80 Standard Cylinder SE80X200CB
The AirTAC Airtac SE80 Standard Cylinder SE80X200CB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X200CB
The AirTAC SE80X200CB is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling up to a maximum of 513 kgf at 1.0 MPa. The 80 mm bore pairs with a PT3/8 port and a 25 mm hard-chrome rod to move substantial loads efficiently.
Unlike traditional tie-rod bodies, this unit utilizes a square extruded aluminum barrel that mounts flush against machine frames, resisting corrosion while saving space. The CB double clevis mounting accessory is integrated directly for pivoting articulation. Field-adjustable air cushioning at both ends allows you to tune the 36 mm cushion stroke via a set screw, softening hard end-stops at high cycling speeds without relying on a fixed rubber bumper.
Airtac SE80 Standard Cylinder SE80X200CB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X200CB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X200CB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X200CB Is Used
Metal Stamping Press
Provides 2513 N of push at 0.5 MPa to hold sheet metal blanks firmly in a stamping die, utilizing the 200 mm stroke to clear the upper tooling during die changes.
Pallet Transfer Diverter
Articulates via the CB double clevis to swing a diverter arm on a packaging conveyor, routing heavy wooden pallets laterally without binding the rod bearing.
Wastewater Filter Press
Closes heavy filter plates in a sludge dewatering press, using the adjustable pneumatic cushion to soften the 36 mm end-of-stroke impact and prevent hydraulic shock.
Is the Airtac SE80 Standard Cylinder SE80X200CB the Right Cylinder?
If 2513 N of push at 0.5 MPa is too much force, stepping down to the 63 mm bore yields 1559 N, whereas stepping up to the 100 mm bore provides 3927 N for heavier payloads. Because this SKU lacks the -S magnet, it cannot host CMSE or DMSE position sensors; if your application requires end-of-stroke signaling, specify the -S option. The CB clevis mount is ideal for pivoting loads, but remember a standard SE cylinder drifts when air is lost or exhausted—the cushion only decelerates the piston near stroke end, it does not lock the load. For true position holding, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X200CB FAQ
The SE80X200CB generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with an absolute maximum push of 513 kgf at 1.0 MPa. It features an 80 mm bore, a 25 mm rod with an M20x1.5 thread, and a PT3/8 air port.
Yes, the SE80X200CB is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, serving as a drop-in replacement for other ISO 15552 profile cylinders. The CB double clevis mount shares the standardized ISO 15552 mounting interface, ensuring your existing hardware and pivot pins align perfectly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X200CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.