Airtac SE80 Standard Cylinder SE80X220
The AirTAC Airtac SE80 Standard Cylinder SE80X220 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 220mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke220 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X220
The AirTAC SE80X220 is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a robust square extruded aluminum barrel without external tie rods, making it highly resistant to corrosion and easy to mount flush against machine frames. Delivering a substantial 2513 N push force at 0.5 MPa, it is engineered for demanding industrial motion tasks.
This 80 mm bore unit utilizes a PT3/8 port and a Ø25 mm hard-chrome plated rod with an M20x1.5 thread. Because this SKU lacks the -S magnet option, it does not support CMSE or DMSE position sensing out of the box. The integrated air cushions at both ends are field-adjustable via a set screw, allowing you to tune end-of-stroke deceleration and eliminate hard impacts during high-speed 30-800 mm/s operations.
Airtac SE80 Standard Cylinder SE80X220 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X220 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X220
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X220 Is Used
Palletizer Case Erection
Provides the 2513 N push force needed to erect and fold heavy corrugated cardboard cases on a high-speed palletizing line, utilizing the 220 mm stroke to clear the forming mechanism.
Press Brake Demolding
Exerts steady 0.5 MPa retraction force (2268 N) to extract heavy stamping dies from a hydraulic press brake, relying on the adjustable cushion to soften the 220 mm return stroke.
Automated Welding Clamp
Handles heavy robotic spot-welding gun actuation, where the 80 mm bore delivers reliable clamping pressure and the extruded profile resists weld spatter damage.
Is the Airtac SE80 Standard Cylinder SE80X220 the Right Cylinder?
If your application requires less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, while moving up to the 100 mm bore provides 3927 N of push force. As a true ISO 15552 profile cylinder, this model is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing FA or FB mounting hardware during retrofits. At a 220 mm stroke, the 25 mm rod handles moderate side loads, but for heavy offset loads you should incorporate an external guide rail. Note that the air cushion only decelerates the piston near the stroke end; it will not hold a load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X220 FAQ
The SE80X220 generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 3518 N. The maximum push force is 513 kgf at 1.0 MPa operating pressure.
No, the SE80X220 is a standard double-acting cylinder. The adjustable air cushions only decelerate the piston near the end of the stroke; they do not function as a brake or lock. If you need to hold a load without live air pressure, consider the BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X220
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.