Airtac SE80 Standard Cylinder SE80X240
The AirTAC Airtac SE80 Standard Cylinder SE80X240 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 240mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke240 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X240
The AirTAC SE80X240 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa and a maximum thrust of 513 kgf. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 80 mm bore unit features a 25 mm piston rod and PT3/8 ports, engineered to cycle within a 30-800 mm/s speed range. Because this specific SKU lacks the -S magnet code, it arrives without built-in position sensing; adding an external rod lock or separate magnetic variant is required if end-position confirmation is needed.
Airtac SE80 Standard Cylinder SE80X240 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X240 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X240
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X240 Is Used
Pallet Diverters
Executes 240 mm strokes to push heavy pallets onto adjacent packaging lines, utilizing the 2513 N push force to overcome sliding friction without stalling.
Injection Mold Ejection
Drives secondary ejection arms on large injection molding machines, where the 80 mm bore and adjustable end cushions absorb the kinetic energy of heavy plastic parts.
Automated Storage Cranes
Actuates pusher arms on automated storage and retrieval systems, moving totes into high-density shelving using the 513 kgf maximum thrust capability.
Is the Airtac SE80 Standard Cylinder SE80X240 the Right Cylinder?
Selecting this 80 mm bore provides 2513 N of push at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N, while stepping up to the 100 mm bore provides 3927 N. At 240 mm of stroke, the 25 mm rod carries substantial side-load capacity, but an external guide rail is still recommended to prevent rod-bearing bending under heavy off-center loads.
As a true ISO 15552 profile cylinder, the SE80X240 is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to reuse existing mounting hardware like FA front flanges or TC trunnion brackets. Note that the field-adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If air pressure drops, the piston will drift, so deploy a BSE rod lock for fail-safe holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X240 FAQ
The SE80X240 generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X240 is dimensionally interchangeable with any ISO 15552 cylinder, matching standard mounting and port dimensions. You can reuse existing FA, FB, or TC mounting accessories. Just ensure your porting matches the PT3/8 thread form.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X240
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.