Airtac SE80 Standard Cylinder SE80X300SCBCR
The AirTAC Airtac SE80 Standard Cylinder SE80X300SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke300 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X300SCBCR
The AirTAC SE80X300 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This 80 mm bore unit includes a built-in position magnet for CMSE or DMSE electronic sensors, alongside field-adjustable air cushioning at both ends to decelerate the 25 mm rod smoothly over its 300 mm stroke. The CB double clevis mounting accessory equips it for pivoting articulations without binding.
Airtac SE80 Standard Cylinder SE80X300SCBCR Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X300SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X300SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X300SCBCR Is Used
Pallet Dispenser Ejection
Uses the 2513 N push force to separate empty pallets in a depalletizing line, relying on the CB clevis to articulate smoothly during the 300 mm ejection arc.
Heavy Package Diverting
Leverages the 300 mm stroke to push heavy cartons across a sorting conveyor, while the -S magnet triggers DMSE sensors to confirm divert completion.
Film Roll Tensioning
Maintains optimal tension on large shrink-wrap film rolls, using the adjustable pneumatic cushions to soften the rod impact at high cycling speeds.
Is the Airtac SE80 Standard Cylinder SE80X300SCBCR the Right Cylinder?
Stepping down to a 63 mm bore drops the 0.5 MPa push force to 1559 N, whereas moving up to a 100 mm bore raises it to 3927 N, letting you fine-tune actuator mass for this 300 mm stroke. Because the 300 mm travel generates significant leverage, an external guide is recommended to prevent rod-bearing bending under heavy lateral loads.
As a true ISO 15552 profile cylinder, this unit provides drop-in dimensional interchangeability for retrofitting existing pneumatic setups using the PT3/8 port and CB clevis. Note that the adjustable end cushions only decelerate the piston near stroke end; if the air supply drops, the cylinder cannot hold a vertical load and will drift, requiring a BSE rod lock for secure positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X300SCBCR FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, and it reaches a maximum push capacity of 513 kgf at 1.0 MPa.
Yes, the SE80X300 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts using the PT3/8 ports and CB clevis, and the integrated magnet works directly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X300SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.