Airtac SE80 Standard Cylinder SE80X460SCBCR
The AirTAC Airtac SE80 Standard Cylinder SE80X460SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 460mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke460 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X460SCBCR
The AirTAC SE80X460SCBCR is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling up to a maximum output of 513 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies bracket installation.
This 80 mm bore unit features a built-in magnet for CMSE reed and DMSE electronic position sensing. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, preventing harsh impacts when cycling at speeds up to 30-800 mm/s. Paired with a CB double clevis mount, it is built to handle articulated loads and pivoting mechanisms reliably.
Airtac SE80 Standard Cylinder SE80X460SCBCR Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X460SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 460 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X460SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×460 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X460SCBCR Is Used
Automated Stamping Press
Provides 2513 N of push force at 0.5 MPa to drive lower-tonnage stamping and blanking dies, utilizing its adjustable cushioning to absorb shock at the end of the 460 mm extension.
Pallet Dispenser Mechanism
Lifts and separates empty pallets on a packaging line, where the CB double clevis accommodates the articulating lift arm and the 80 mm bore supplies enough thrust to overcome sticky stack friction.
Heavy-Duty Indexing Gate
Actuates a large industrial security gate or machine guard, using the 460 mm stroke to achieve full clearance while the DMSE electronic sensor confirms closure for safety interlocks.
Is the Airtac SE80 Standard Cylinder SE80X460SCBCR the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application requires substantial thrust, such as lifting heavy platens or actuating large gates. If you need slightly less force, stepping down to a 63 mm bore reduces the push output to 1559 N at 0.5 MPa. Conversely, if you require more power, upgrading to a 100 mm bore increases the 0.5 MPa push force to 3927 N. Because this model uses a PT3/8 port and a 25 mm rod, it provides robust physical strength for demanding industrial environments.
With a 460 mm stroke, the unsupported piston rod is highly susceptible to side-load bending and bearing wear under off-center loads; always incorporate an external guide rail to prevent premature seal failure. Remember that a standard SE cylinder relies on live air pressure to maintain its position—if air is lost or the valve centers, the load will drift, so integrate a BSE rod lock for fail-safe holding. The CB mounting accessory and -S magnet configuration make this unit a direct, drop-in replacement for any ISO 15552 cylinder with matching dimensions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X460SCBCR FAQ
This 80 mm bore cylinder delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable with any ISO 15552 profile cylinder, allowing a drop-in retrofit using existing mounting hardware and PT3/8 ports. However, it is a standard double-acting cylinder, meaning it will drift if air pressure is lost; for position holding under load, you need a separate BSE rod lock unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X460SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.