Airtac SE80 Standard Cylinder SE80X565S
The AirTAC Airtac SE80 Standard Cylinder SE80X565S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 565mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke565 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X565S
The AirTAC SE80X565S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding motion tasks. It yields a robust 2513 N push force at 0.5 MPa and a 2268 N pull, driven through an 80 mm bore and a 25 mm hard-chrome rod. Because it uses an extruded aluminum barrel without external tie rods, the body resists corrosion and mounts flush against machine frames, saving valuable space.
This specific configuration includes a built-in magnet for CMSE and DMSE position sensing, plus field-adjustable air cushions at both ends to soften hard end-stops during high-speed cycles. The 565 mm stroke is a non-standard made-to-order length, expanding your reach beyond the 1500 mm standard catalog maximum while retaining the PT3/8 porting and M20x1.5 rod thread.
Airtac SE80 Standard Cylinder SE80X565S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X565S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 565 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X565S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×565 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X565S Is Used
Pallet Transfer Line Diverter
Uses the 2513 N push force at 0.5 MPa to reliably deflect heavy timber pallets onto a secondary conveyor track without rebounding.
Corrugated Box Flap Folder
Leverages the 565 mm stroke to reach across a wide packaging machine, folding large outer flaps prior to hot-melt gluing.
Automotive Door Hinge Press
Applies steady clamping pressure to seat steel hinge pins during body-in-white assembly using the 25 mm hard-chrome rod.
Is the Airtac SE80 Standard Cylinder SE80X565S the Right Cylinder?
If your application requires less force, the adjacent 63 mm bore yields 1559 N of push at 0.5 MPa; conversely, stepping up to the 100 mm bore provides 3927 N. Keep in mind that a plain SE cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered—for those scenarios, consider the BSE rod lock variant. Because this 565 mm stroke creates a long unsupported rod span, side-load bending is a significant risk; you must use an external guide to prevent rod-bearing damage. To replace an existing ISO 15552 unit, match the 80 mm bore, 565 mm stroke, PT3/8 port, and the -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X565S FAQ
This 80 mm bore cylinder generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. The 565 mm stroke is classified as non-standard and is made-to-order.
Yes, it is dimensionally interchangeable with any standard ISO 15552 profile cylinder and uses the same mounting hardware. However, it cannot hold a load without live air pressure; if the valve is centered or air drops, the piston drifts. The adjustable cushion only decelerates the piston near the stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X565S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.