Airtac SE80 Standard Cylinder SE80X600
The AirTAC Airtac SE80 Standard Cylinder SE80X600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X600
The AirTAC SE80X600 is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding industrial motion. It features an 80mm bore and a 600mm stroke, generating 2513N of push force at 0.5MPa and 3518N at 0.7MPa. The extruded aluminum barrel omits external tie rods entirely, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames.
This unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near stroke end, allowing technicians to dial out harsh impacts at high cycling speeds. Because this specific SKU lacks the -S magnet code, it is not equipped for AirTAC CMSE or DMSE position sensing out of the box. Furthermore, the plain double-acting design means it will drift if air pressure is lost or exhausted, as the cushion only decelerates and does not lock the load.
Airtac SE80 Standard Cylinder SE80X600 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X600
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X600 Is Used
Corrugated Box Forming
Drives the folding mechanism on large corrugated box erecting machines, utilizing the 2513N push force and 600mm stroke to square heavy board blanks.
Pallet Transfer Stop
Acts as a robust pop-up stop gate on heavy-duty pallet conveyors, where the 3518N thrust at 0.7MPa securely halts loaded pallets.
Press Feed Ejection
Clears stamped metal parts from press beds, using the 600mm extension to push components clear of the tooling area safely.
Is the Airtac SE80 Standard Cylinder SE80X600 the Right Cylinder?
Stepping down to the 63mm bore drops the 0.5MPa push output to 1559N, while moving up to the 100mm bore increases it to 3927N, giving you clear sizing boundaries around this 80mm model's 2513N capacity. At 600mm of travel, the unsupported rod length and 25mm rod diameter face significant bending moments under side loads; incorporating an external guide rail is strongly recommended to prevent premature rod-bearing wear. For any application requiring the piston to hold its position during air loss or valve centering, this standard SE cylinder is insufficient and must be paired with a BSE rod lock or external pilot-operated check valve. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other profile cylinders sharing the PT3/8 port and standardized mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X600 FAQ
The SE80X600 generates 2513N of push force and 2268N of pull force at 0.5MPa, 3518N of push at 0.7MPa, and reaches a maximum push of 513kgf at 1.0MPa operating pressure.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders and shares standardized mounting hardware. However, it does not hold loads unpowered; the adjustable air cushion only decelerates the piston near stroke end, so a BSE rod lock is required for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.