Airtac SE80 Standard Cylinder SE80X60CB
The AirTAC Airtac SE80 Standard Cylinder SE80X60CB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X60CB
The AirTAC SE80X60CB is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic tasks. With an 80 mm bore, it generates 2513 N of push force and 2268 N of pull force at 0.5 MPa, peaking at a maximum 513 kgf at 1.0 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This specific SKU includes a CB double clevis mounting accessory for pivoting articulation and lacks a built-in position-sensing magnet. Operators can fine-tune the field-adjustable air cushioning at both ends via a dedicated screw to soften end-of-stroke impacts at speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80X60CB Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X60CB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X60CB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X60CB Is Used
Lift Truck Tailgate Pivot
Leveraging the 2513 N push force and CB double clevis mount, this cylinder articulates heavy hydraulic tailgates on material handling lift trucks safely.
Pallet Diverter Arm
The 60 mm stroke rapidly actuates a diverter arm on a high-speed packaging conveyor, using the adjustable end cushions to soften rapid direction reversals.
Stamping Press Knockout
Provides the robust 2268 N pull force required to eject stamped metal blanks from a progressive die press, benefiting from the no-tie-rod barrel's flush mounting.
Is the Airtac SE80 Standard Cylinder SE80X60CB the Right Cylinder?
If your pivot application requires less force, stepping down to the 63 mm bore yields 1559 N of push at 0.5 MPa, while moving up to the 100 mm bore provides 3927 N for heavier loads. Because this is a double-acting cylinder, it cannot hold a load if air pressure is lost or the valve centers; the piston will drift. For position holding, consider the BSE rod lock variant. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, utilizing the standard PT3/8 port and M20x1.5 rod thread. The 60 mm stroke is well below the side-load bending threshold, so an external guide is generally unnecessary for standard articulation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X60CB FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
Yes, the SE80X60CB is dimensionally interchangeable per ISO 15552 standards, featuring a standard PT3/8 port and M20x1.5 rod thread. It serves as a direct drop-in replacement for other ISO 15552 profile cylinders without requiring new mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X60CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.