Airtac SE80 Standard Cylinder SE80X80S
The AirTAC Airtac SE80 Standard Cylinder SE80X80S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke80 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X80S
The AirTAC SE80X80S is a double-acting single-rod ISO 15552 profile cylinder engineered for robust pneumatic motion. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling up to a maximum 513 kgf at 1.0 MPa. The 80 mm bore utilizes a PT3/8 port and a 25 mm hard-chrome plated rod for structural rigidity.
This unit incorporates a built-in magnet (-S) designed to interface seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-travel detection. The extruded aluminum square barrel eliminates external tie rods, offering a compact, corrosion-resistant profile that mounts flush, while the field-adjustable air cushioning at both ends allows you to fine-tune deceleration and soften hard end stops dynamically.
Airtac SE80 Standard Cylinder SE80X80S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X80S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X80S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X80S Is Used
Carton Case Erectors
Provides the 2513 N push force required to fold and seal heavy corrugated carton blanks at high cycling speeds on packaging lines.
Pallet Diverters
Leverages the 80 mm stroke and 25 mm rod to push loaded pallets cleanly onto secondary conveyor tracks without side-loading the bearing.
Injection Mold Clamps
Utilizes the built-in magnet for CMSE sensor feedback to confirm mold closure positioning before high-pressure plastic injection begins.
Is the Airtac SE80 Standard Cylinder SE80X80S the Right Cylinder?
Generating 2513 N of push at 0.5 MPa, this 80 mm bore fits neatly between the 63 mm class (1559 N push) and the 100 mm class (3927 N push). If your payload requires less force or you need a smaller physical footprint, stepping down to the 63 mm bore is ideal; conversely, the 100 mm bore provides substantially higher thrust for heavier loads. Because this is a double-acting cylinder, it relies on continuous air pressure to hold position; if air is lost or the valve is centered, the piston will drift. For applications requiring true load holding without live pressure, consider the BSE rod lock variant. The 80 mm stroke keeps the unsupported rod length short, minimizing rod-bearing bending, but always ensure your mounting hardware matches the ISO 15552 interface for optimal alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X80S FAQ
The SE80X80S generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N. The maximum allowable push force is 513 kgf when operating at the maximum pressure of 1.0 MPa.
Yes, the SE80X80S is a true ISO 15552 / VDMA 24562 profile cylinder. It is dimensionally interchangeable with other ISO 15552 cylinders, allowing for a direct drop-in retrofit using existing standardized mounting hardware and PT3/8 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.