Airtac SE80 Standard Cylinder SE80X85
The AirTAC Airtac SE80 Standard Cylinder SE80X85 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 85mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke85 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X85
The AirTAC SE80X85 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa and a maximum output of 513 kgf at 1.0 MPa. Because it utilizes a square extruded aluminum barrel without external tie rods, it offers a highly compact, corrosion-resistant body that mounts flush against machine frames, saving valuable space in dense layouts.
This 80 mm bore unit features a 25 mm piston rod with an M20x1.5 thread and a PT3/8 port. It includes field-adjustable air cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a set screw to soften hard impacts at operating speeds up to 800 mm/s. Note that this specific SKU is supplied without a built-in magnet, so it does not support direct CMSE or DMSE position sensing without modification.
Airtac SE80 Standard Cylinder SE80X85 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X85 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X85
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X85 Is Used
Injection Mold Ejection
Provides the 2513 N push force required to eject dense plastic automotive interior panels from the mold cavity reliably over an 85 mm stroke.
Press Brake Tooling
Drives adjustable back-gauge fingers on a CNC press brake, utilizing the 25 mm rod to absorb moderate side loads during sheet metal positioning.
Palletizer Clamp Arm
Actuates the mechanical clamp arms on a robotic palletizer, handling heavy corrugated goods where the 36 mm cushion length safely decelerates the load.
Is the Airtac SE80 Standard Cylinder SE80X85 the Right Cylinder?
If your application requires less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, whereas stepping up to the 100 mm bore provides a 3927 N push at 0.5 MPa for heavier cycles. As a standard ISO 15552 profile cylinder, this model serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standard mounting accessories like FA front flanges or TC center trunnions. Remember that a plain SE cylinder does not hold its load when air pressure is lost; if your process requires static holding, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X85 FAQ
The SE80X85 delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It uses a PT3/8 port and operates at speeds between 30 and 800 mm/s.
Yes, the SE80X85 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and can be used as a drop-in replacement for other ISO 15552 profile cylinders using standard mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X85
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.