Airtac SE80 Standard Cylinder SE80X90N
The AirTAC Airtac SE80 Standard Cylinder SE80X90N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 90mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke90 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X90N
The AirTAC SE80X90N is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Featuring an 80 mm bore and a 90 mm stroke, it operates efficiently between 30-800 mm/s. This unit utilizes an NBR seal, making it highly effective for standard industrial pneumatics rather than high-temperature environments.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, protecting payloads from hard impacts. Note that this specific SKU lacks a position-sensing magnet, so it operates without CMSE or DMSE electronic feedback.
Airtac SE80 Standard Cylinder SE80X90N Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X90N |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X90N
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X90N Is Used
Pallet Diverting Gate
Actuates a heavy routing gate on a packaging conveyor, utilizing the 2513 N push force to smoothly pivot loaded pallets without stalling.
Corrugated Box Flap Folder
Drives the mechanical folding arms on a carton erector, relying on the 90 mm stroke and adjustable cushioning to prevent tearing heavy corrugated cardboard.
Injection Mold Platen Ejector
Pushes finished plastic parts off an injection molding platen, where the 25 mm rod handles the repetitive extraction load reliably.
Is the Airtac SE80 Standard Cylinder SE80X90N the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force margins: the SE63X200 offers 1559 N push at 0.5 MPa if your load is lighter, while stepping up to the SE100X100 provides 3927 N for heavier demands. Because this model uses an NBR seal, ensure your ambient operating temperature stays within the standard -20 to +70 °C range. For drop-in ISO 15552 retrofits, match the 90 mm stroke, PT3/8 port, and appropriate mounting accessory. If the application requires position holding upon air loss, a plain SE cylinder will drift; you must integrate an external pilot-operated check valve or specify a BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X90N FAQ
This 80 mm bore cylinder generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. Its operational speed range is 30-800 mm/s.
Yes, the SE80X90N is dimensionally interchangeable with any standard ISO 15552 profile cylinder, utilizing a PT3/8 port and M20x1.5 rod thread. However, this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modifying the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X90N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.