Airtac SED Double Rod Cylinder SED100X190S
The AirTAC Airtac SED Double Rod Cylinder SED100X190S is a genuine double-acting ISO 15552 double-rod cylinder: a Ø25mm piston rod exits BOTH ends of the Ø100mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 190mm, PT1/2 ports, adjustable cushioning.
- BoreØ100 mm
- Stroke190 mm
- Port sizePT1/2
- ConfigurationDouble rod
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SED Double Rod Cylinder SED100X190S
The AirTAC SED100X190S is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. A 25 mm rod extends from both end covers, yielding identical annulus areas. This means drive force is perfectly symmetrical, generating 3681 N each way at 0.5 MPa.
The extruded aluminum barrel omits external tie rods for a clean profile. Equipped with a -S magnet, the cylinder supports DMSE electronic and CMSE reed sensors for end-of-stroke detection. Field-adjustable air cushions at both ends absorb kinetic energy, while the rear rod can drive a secondary mechanism or cam.
Airtac SED Double Rod Cylinder SED100X190S Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED100X190S |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED100X190S
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED100X190S Is Used
Servo Press Platen
Drives a 5153 N stamping platen at 0.7 MPa, using the twin rods to keep the heavy tool perfectly parallel during high-speed precision metal forming.
Pallet Divert Gate
Actuates a heavy diverting gate on a packaging line, relying on the equal both-way force to smoothly push and retract loaded pallets without twisting.
Multi-Stage Forming Die
Powers a large forming die where the rear rod simultaneously triggers a mechanical cam, sequencing the next machine station at 3681 N.
Is the Airtac SED Double Rod Cylinder SED100X190S the Right Cylinder?
Choose this 100 mm bore when an application requires 3681 N of symmetrical force at 0.5 MPa. If you need less power, the 80 mm bore provides 2268 N both ways. For heavier loads, the 125 mm bore outputs 5734 N. The twin-rod design inherently resists torsion and provides superior anti-rotation compared to a single-rod SE cylinder.
This model includes a PT1/2 port and an M20x1.5 rod thread. The adjustable cushion decelerates the piston near stroke ends but does not lock position; a plain SED drifts on air loss. For fail-safe holding, select a BSED double-rod rod lock or external brake. When replacing an ISO 15552 cylinder, match the 190 mm stroke, port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED100X190S FAQ
Because the double-rod design yields equal area on both sides, force is identical in extend and retract. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
The twin rods provide superior anti-rotation and dual-side load guidance. The rear rod can also mount a sensor flag or drive a secondary mechanism, and the symmetrical annulus area ensures speed and force remain exactly the same in both directions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED100X190S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.