Airtac SED Double Rod Cylinder SED100X195
The AirTAC Airtac SED Double Rod Cylinder SED100X195 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø25mm piston rod exits BOTH ends of the Ø100mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 195mm, PT1/2 ports, adjustable cushioning.
- BoreØ100 mm
- Stroke195 mm
- Port sizePT1/2
- ConfigurationDouble rod
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SED Double Rod Cylinder SED100X195
The AirTAC SED100X195 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. A 25mm rod exits both end covers, yielding an identical annulus area on both sides. This means you get exactly 3681 N of output force at 0.5 MPa in both extend and retract directions.
Because this specific SKU lacks the -S magnet option, it has no onboard position sensing. You can use the protruding rear rod to mount a mechanical cam or external limit flag. The extruded aluminum barrel incorporates adjustable air cushioning at both ends to decelerate heavy 100mm loads near stroke extremes.
Airtac SED Double Rod Cylinder SED100X195 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED100X195 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 195 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED100X195
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED100X195 Is Used
Injection Mold Plating
Drives a 3681 N clamping fixture on both extend and retract strokes, using the rear rod to simultaneously actuate an ejection pin.
Pallet Transfer Pusher
Pushes heavy machined pallets with equal force both ways, relying on the twin 25mm rods to prevent binding during lateral indexing.
Textile Calendering
Applies uniform 5153 N pressure at 0.7 MPa across fabric rollers, utilizing the symmetrical thrust to maintain consistent material tension.
Is the Airtac SED Double Rod Cylinder SED100X195 the Right Cylinder?
Choose this 100mm bore if you need substantial equal both-way force. Stepping down to the 80mm bore drops your output to 2268 N at 0.5 MPa, while stepping up to the 125mm bore raises it to 5734 N. The twin-rod design provides superior anti-rotation resistance compared to a single-rod SE cylinder, supporting dual-side loads or rear-rod tooling.
This cylinder cannot hold position on air loss; the piston will drift without pressure. For fail-safe holding, use an external pilot-operated check valve or the BSED double-rod lock variant. To replace an ISO 15552 unit, match the 195mm stroke, PT1/2 port, and your required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED100X195 FAQ
Because the rod occupies both sides of the piston, force is identical in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. Just ensure you have rear-rod clearance, select from the available mountings (Basic, FA, LB, TC, FTC, TCM1, TCM2), and note this SKU has no position magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED100X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.