Airtac SED Double Rod Cylinder SED32X1000
The AirTAC Airtac SED Double Rod Cylinder SED32X1000 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø12mm piston rod exits BOTH ends of the Ø32mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 1000mm, PT1/8 ports, adjustable cushioning.
- BoreØ32 mm
- Stroke1000 mm
- Port sizePT1/8
- ConfigurationDouble rod
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED32X1000
The AirTAC SED32X1000 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 1000mm stroke. A 12mm carbon steel rod exits both end covers, yielding identical annulus areas. This provides an equal 345N of thrust in both directions at 0.5MPa.
Because the rear rod protrudes through the back cover, you can mount a secondary cam or sensor flag directly to it. This unit lacks the -S magnet option, meaning no CMSE or DMSE electronic sensors can be fitted. You must allow extra physical clearance at the rear for the extending rod.
Airtac SED Double Rod Cylinder SED32X1000 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED32X1000 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED32X1000
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED32X1000 Is Used
Long-Stroke Transfer Pusher
Drives a 1000mm parts shuttle on a packaging conveyor. The equal 345N both-way force ensures consistent push and pull across the long travel.
Twin-Spindle Slitter
Actuates a cutting head where the rear rod mounts a cam to trigger a mechanical knife valve, utilizing the anti-rotation properties of the double rod.
Web Guide Mechanism
Steers a thin material web over a 1-meter path. The symmetrical double-rod prevents uneven seal wear that single-rod cylinders suffer under lateral loads.
Is the Airtac SED Double Rod Cylinder SED32X1000 the Right Cylinder?
Choose this 32mm bore if you need 345N both-way force at 0.5MPa. Stepping down is not an option as 32mm is the smallest SED profile. Stepping up to the 40mm bore yields 528N both ways. A twin-rod setup resists rotational twist better than a single-rod SE cylinder. Remember, the adjustable air cushion decelerates the piston near stroke ends but does not lock position on air loss. For fail-safe holding, use a BSED rod lock cylinder. At 1000mm stroke, the 12mm rod is highly susceptible to side loads; always support the load with external linear guides to prevent binding.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED32X1000 FAQ
Because the double-rod design creates equal piston areas on both sides, it provides 345N at 0.5MPa, 483N at 0.7MPa, and a maximum of 70kgf at 1.0MPa in both extend and retract directions.
Yes, it is dimensionally interchangeable per ISO 15552. Match the 32mm bore, 1000mm stroke, PT1/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note this unit lacks a magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED32X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.