Airtac SED Double Rod Cylinder SED32X110
The AirTAC Airtac SED Double Rod Cylinder SED32X110 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø12mm piston rod exits BOTH ends of the Ø32mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 110mm, PT1/8 ports, adjustable cushioning.
- BoreØ32 mm
- Stroke110 mm
- Port sizePT1/8
- ConfigurationDouble rod
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED32X110
The AirTAC SED32X110 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensions. A 12mm rod exits both end covers, yielding exactly 345 N of output force at 0.5 MPa in both extend and retract directions.
This twin-rod layout gives superior anti-rotation guidance compared to a single-rod SE. The protruding rear rod can mount a cam or secondary tool. It features adjustable air cushions at both ends, though this SKU lacks a magnet for position sensing.
Airtac SED Double Rod Cylinder SED32X110 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED32X110 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED32X110
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED32X110 Is Used
PCB Depaneling Saw
Drives a cutting head with 345 N of equal force both ways, while the rear rod prevents blade torsion during precise V-groove cuts.
Shuttle Transfer Gate
Actuates a diverter flap where the rear rod end mounts a physical limit flag, requiring no internal piston magnet.
Pick-and-Place Gripper
Powers a synchronous dual-side gripper carriage, using the twin rods to maintain parallel clamping without twisting.
Is the Airtac SED Double Rod Cylinder SED32X110 the Right Cylinder?
Choose this 32mm bore if you need 345 N of equal both-way force. Step down is not available, but stepping up to the 40mm bore yields 528 N at 0.5 MPa. The 110mm stroke is standard and made to order if nonstandard. Unlike a single-rod SE, the SED twin-rod design drives dual loads and resists torsion. Air cushions only decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock or BSED. Match ISO 15552 replacements by bore, stroke, PT1/8 port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2—no FB/CA/CB/CR).
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED32X110 FAQ
Because the rod occupies both sides of the piston, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Yes, it is a profile cylinder dimensionally interchangeable per ISO 15552. Match the 32mm bore, 110mm stroke, PT1/8 port, and mounting style. Ensure you leave rear-rod clearance, as the double-rod design increases overall length.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED32X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.