Airtac SED Double Rod Cylinder SED32X60S
The AirTAC Airtac SED Double Rod Cylinder SED32X60S is a genuine double-acting ISO 15552 double-rod cylinder: a Ø12mm piston rod exits BOTH ends of the Ø32mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 60mm, PT1/8 ports, adjustable cushioning.
- BoreØ32 mm
- Stroke60 mm
- Port sizePT1/8
- ConfigurationDouble rod
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED32X60S
The AirTAC SED32X60S is a double-acting, double-rod profile cylinder built to ISO 15552 dimensions. A 12mm rod exits both end covers, yielding equal effective piston areas. This means you get 345 N of output force in both extend and retract directions at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, ensuring a clean profile that drops in seamlessly for ISO 15552 machine replacements.
Fitted with the -S magnet option, this 32mm bore unit supports CMSE reed and DMSE electronic sensors for end-of-stroke detection. The rear rod extension is ideal for mounting a secondary cam or driving a separate mechanism, while the twin-rod geometry naturally resists torsional load and guides against rotation. Adjustable air cushions at both ends protect your components over the 60mm stroke.
Airtac SED Double Rod Cylinder SED32X60S Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED32X60S |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED32X60S
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED32X60S Is Used
Pick-and-Place Gantry
Drives a 345 N vertical gripper on a precision gantry, using the rear rod end to mount a physical cam that triggers a mechanical limit switch.
Package Reject Gate
Pushes light cartons off a conveyor belt with equal 345 N force in both directions, ensuring consistent retraction speed for the reject arm.
PCB Shuttle Transfer
Shuttles lightweight PCB cassettes between processing stations, leveraging the twin 12mm rods to prevent binding and resist rotational torque.
Is the Airtac SED Double Rod Cylinder SED32X60S the Right Cylinder?
Choose this 32mm bore if your application requires 345 N both ways at 0.5 MPa. If you need less force, a smaller ISO cylinder is appropriate; if you need more, stepping up to the 40mm bore provides 528 N both ways at 0.5 MPa. The twin-rod design is preferred over a single-rod SE when you need anti-rotation guidance, rear-rod tooling, or dual-side sensing. Remember that a standard SED does not hold position on air loss—the piston drifts, and the adjustable air cushion only decelerates near stroke end, acting as a bumper rather than a brake. For fail-safe holding, consider a BSED rod-lock cylinder or an external pilot-operated check valve. When replacing an ISO 15552 unit, match the 32mm bore, 60mm stroke, PT1/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED32X60S FAQ
Because the double-rod design has equal piston areas on both sides, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Yes. As an ISO 15552 profile cylinder, it is dimensionally interchangeable with other standard ISO 15552 double-rod units. Just match the 32mm bore, 60mm stroke, PT1/8 port, and mounting interface. Note that the overall length is longer than a single-rod cylinder to accommodate the rear rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED32X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.