Airtac SED Double Rod Cylinder SED50X35S
The AirTAC SED Double Rod Cylinder SED50X35S is a genuine double-acting ISO 15552 double-rod cylinder: a Ø20mm piston rod exits BOTH ends of the Ø50mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 35mm, PT1/4 ports, adjustable cushioning.
- BoreØ50 mm
- Stroke35 mm
- Port sizePT1/4
- ConfigurationDouble rod
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED50X35S
The AirTAC SED50X35S is a double-acting, double-rod ISO 15552 profile cylinder. Because a rod exits both ends, the annulus area is symmetrical, giving you exactly 825 N of thrust and pull at 0.5 MPa. The extruded aluminum barrel lacks external tie rods, ensuring a clean ISO 15552 mounting footprint.
Equipped with a -S magnet, this model supports CMSE reed and DMSE electronic sensors for end-of-stroke confirmation. The rear rod extension is ideal for mounting a cam or secondary limit flag, while the twin M16x1.5 rods provide superior anti-rotation guidance for precision short-stroke tasks.
Airtac SED Double Rod Cylinder SED50X35S Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED50X35S |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 825 N |
| 0.7 MPa | 1155 N |
| Max (@1.0 MPa) | 168 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED50X35S
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED50X35S Is Used
Pick-and-Place Grippers
Provides 825 N of equal both-way force at 0.5 MPa, ensuring stable part transfer without rotational drift on compact assembly lines.
Web Edge Guiding
Twin M16x1.5 rods resist lateral deflection, using the rear rod end to drive a cam for precise material tracking at 30-800 mm/s.
Dual-Side Sealing Press
Simultaneously actuates two sealing jaws with 1154 N at 0.7 MPa, leveraging the through-rod symmetry for perfectly balanced clamping.
Is the Airtac SED Double Rod Cylinder SED50X35S the Right Cylinder?
Choose this 50mm bore if you need 825 N both ways at 0.5 MPa. Stepping down to a 40mm bore yields 528 N both ways, while moving up to a 63mm bore provides 1402 N both ways. The twin-rod design is preferred over a single-rod SE when your application demands high torsional rigidity or synchronized dual-side actuation. Remember that the adjustable air cushions only decelerate the load near stroke end; they do not hold position on air loss. For fail-safe holding, consider a BSED rod-lock cylinder or external pilot-operated check valve. To replace an existing ISO 15552 unit, match the 50mm bore, 35mm stroke, PT1/4 port, and desired mounting (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED50X35S FAQ
Because the double-rod design equalizes the piston area, it generates 825 N at 0.5 MPa and 1154 N at 0.7 MPa in both directions. The maximum force is 168 kgf at 1.0 MPa.
The twin rods exiting both covers provide superior anti-rotation guidance and allow the rear rod to drive a secondary mechanism or sensor cam. It remains dimensionally interchangeable per ISO 15552 while offering equal push and pull forces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED50X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.