Airtac SED Double Rod Cylinder SED63X130
The AirTAC SED Double Rod Cylinder SED63X130 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø20mm piston rod exits BOTH ends of the Ø63mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 130mm, PT3/8 ports, adjustable cushioning.
- BoreØ63 mm
- Stroke130 mm
- Port sizePT3/8
- ConfigurationDouble rod
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED63X130
The AirTAC SED63X130 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. Because a rod exits both end covers, the annular piston area is identical on extend and retract. It delivers an equal 1402 N of force in both directions at 0.5 MPa.
This unit lacks the -S magnet option, meaning no CMSE or DMSE sensors can be fitted to this SKU. The extruded aluminum barrel includes sensor grooves, but rear-rod tooling or cam actuation remains fully supported. Adjustable air cushioning at both ends decelerates the load near stroke end.
Airtac SED Double Rod Cylinder SED63X130 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED63X130 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED63X130
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED63X130 Is Used
CNC Lathe Bar Feeder
Drives push-pull feed fingers with 1402 N both ways, using the rear rod end to carry a cam flag for the machine interlock.
Package Divert Arm
Actuates a dual-sided divert flap on a packaging line, leveraging the twin rods to prevent flap twisting under asymmetric carton loads.
Glass Edge Straightener
Presses and retracts a leveling roller with equal 0.5 MPa force, ensuring constant pressure without requiring pressure adjustments between strokes.
Is the Airtac SED Double Rod Cylinder SED63X130 the Right Cylinder?
Selecting this 63 mm bore over the smaller 50 mm (825 N both ways at 0.5 MPa) gives you 1402 N bidirectional force, while stepping up to the 80 mm bore yields 2268 N. Choose the SED63X130 when you need twin-rod anti-rotation guidance or rear-rod tooling that a single-rod SE cannot provide. As a standard 130 mm stroke under 300 mm, side-loading is minimal but external guides are always recommended for heavy loads.
For direct replacement, match the 63 mm bore, 130 mm stroke, PT3/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that a plain SED does not hold position on air loss; for fail-safe holding, specify a BSED rod-lock cylinder or an external pilot-operated check valve.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED63X130 FAQ
The SED63X130 provides equal force in both directions because the rod occupies both sides of the piston. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552. Just match the 63 mm bore, 130 mm stroke, PT3/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, TCM2). Ensure you leave rear-rod clearance, as it is longer than a single-rod SE.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED63X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.