Airtac SED Double Rod Cylinder SED63X130S
The AirTAC SED Double Rod Cylinder SED63X130S is a genuine double-acting ISO 15552 double-rod cylinder: a Ø20mm piston rod exits BOTH ends of the Ø63mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 130mm, PT3/8 ports, adjustable cushioning.
- BoreØ63 mm
- Stroke130 mm
- Port sizePT3/8
- ConfigurationDouble rod
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED63X130S
The AirTAC SED63X130S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 130mm stroke. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding exactly 1402 N of force each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, ensuring clean integration and true ISO 15552 mounting interchangeability.
This unit includes the -S magnet option for precise position detection with CMSE reed or DMSE electronic sensors. A field-adjustable air cushion at both ends softens end-of-stroke impacts, while the rear rod end can be used to mount a secondary cam or sensor flag.
Airtac SED Double Rod Cylinder SED63X130S Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED63X130S |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED63X130S
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED63X130S Is Used
Multi-Spindle Drill Head
Lifts and lowers a multi-spindle drill head with 1402 N of equal both-way force, using the rear rod to mount a travel-limit flag for precise depth control.
Pallet Transfer Pusher
Pushes heavy pallets laterally across a transfer section; the twin rods prevent binding and torsional wear under high dynamic loads.
Indexing Gate Drive
Actuates a dual-sided indexing gate, using the equal extend and retract speeds to maintain smooth, synchronized material flow.
Is the Airtac SED Double Rod Cylinder SED63X130S the Right Cylinder?
Choose this 63mm bore if you need 1402 N of bidirectional force at 0.5 MPa. If your load is lighter, the 50mm model provides 825 N both ways; for heavier drives, step up to the 80mm bore for 2268 N. The twin-rod design is preferred over a single-rod SE cylinder when the application demands high resistance to torsion or requires driving a mechanism from both ends. Remember that a plain SED does not hold position on air loss; for fail-safe locking, consider the BSED rod-lock variant or an external lock.
When replacing an ISO 15552 cylinder, match the 130mm stroke, PT3/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). The M16x1.5 rod ends and 36mm cushion length provide stable deceleration for typical 30-800 mm/s cycling.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED63X130S FAQ
The SED63X130S provides equal force in both directions due to the double-rod design. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
The double-rod design provides identical extend and retract speeds while greatly improving resistance to side-load rotation. The rear rod can also drive a secondary mechanism or carry a sensor cam, making it ideal for complex ISO 15552 machine setups.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED63X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.