Airtac SED Double Rod Cylinder SED63X210
The AirTAC SED Double Rod Cylinder SED63X210 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø20mm piston rod exits BOTH ends of the Ø63mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 210mm, PT3/8 ports, adjustable cushioning.
- BoreØ63 mm
- Stroke210 mm
- Port sizePT3/8
- ConfigurationDouble rod
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED63X210
The AirTAC SED63X210 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. Because a 20mm rod exits both end covers, the effective piston area is identical in extend and retract, yielding 1402 N of thrust each way at 0.5 MPa. The extruded aluminum barrel omits external tie rods, providing a clean profile for direct ISO 15552 machine interfacing.
This 63mm bore unit features a PT3/8 port and 36mm adjustable air cushions at both ends to manage end-of-stroke kinetic energy. It ships without a magnet (-S), meaning no onboard position sensing is equipped on this SKU. The twin-rod design inherently resists torsional rotation, making it ideal for guiding heavy vertical tooling or driving dual mechanisms from a single piston.
Airtac SED Double Rod Cylinder SED63X210 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED63X210 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 210 mm |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED63X210
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED63X210 Is Used
PCB Edge Routing Machine
Drives a vertical routing spindle with 1402 N both ways at 0.5 MPa. The twin 20mm rods prevent spindle deflection during plunge cuts, ensuring clean board edges.
Reciprocating Transfer Shuttle
Moves parts between two stations using 1962 N at 0.7 MPa. The rear protruding rod mounts a physical cam that trips a mechanical valve at mid-stroke.
Textile Web Guiding
Adjusts fabric tracking rollers with up to 286 kgf max force. The symmetrical push/pull area keeps tensioning consistent in both travel directions.
Is the Airtac SED Double Rod Cylinder SED63X210 the Right Cylinder?
Selecting this 63mm bore over the adjacent 50mm (825 N both ways at 0.5 MPa) or 80mm (2268 N both ways at 0.5 MPa) sizes is correct when your mechanism requires approximately 1400 N of symmetrical force. The 210mm stroke is standard, but at this length you should verify external guide shafts to prevent side-load sagging on the 20mm rods. Choose this double-rod SED over a single-rod SE when the application demands anti-rotation stability or requires a rear rod extension for mounting a cam or secondary actuator. Remember that the adjustable cushions only decelerate the load near stroke end; they do not hold position on air loss. For fail-safe holding, consider a BSED series rod lock or an external pilot-operated check valve.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED63X210 FAQ
Because the double-rod design subtracts rod area from both piston sides, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Yes. The SED63X210 is a true ISO 15552 profile cylinder with standard mounting dimensions for Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments. It provides direct dimensional interchangeability for any standard ISO 15552 double-rod cylinder footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED63X210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.