Airtac SED Double Rod Cylinder SED63X220
The AirTAC SED Double Rod Cylinder SED63X220 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø20mm piston rod exits BOTH ends of the Ø63mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 220mm, PT3/8 ports, adjustable cushioning.
- BoreØ63 mm
- Stroke220 mm
- Port sizePT3/8
- ConfigurationDouble rod
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED63X220
The AirTAC SED63X220 is a double-acting, double-rod ISO 15552 profile cylinder with a 63 mm bore and 220 mm stroke. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding equal force of 1402 N each way at 0.5 MPa. The extruded aluminum barrel has no external tie rods, ensuring clean integration.
This unit lacks the -S magnet option, so it has no built-in position sensing. The rear rod can drive a secondary mechanism or carry a cam, while the twin 20 mm rods guide the load against rotation. Field-adjustable air cushions at both ends decelerate the piston near stroke end.
Airtac SED Double Rod Cylinder SED63X220 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED63X220 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 220 mm |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED63X220
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED63X220 Is Used
CNC Fixture Clamping
Uses the 1402 N both-way force to clamp parts securely during machining, leveraging the twin rods to prevent jaw rotation under heavy cutting loads.
Transfer Pusher
Employs the rear rod to trigger a mechanical limit flag while the front rod pushes components between conveyor belts at balanced speeds.
Synchronized Lift Station
Drives a dual-sided lifting mechanism where equal extend and retract forces are critical for maintaining platform stability during vertical strokes.
Is the Airtac SED Double Rod Cylinder SED63X220 the Right Cylinder?
Choose this 63 mm bore when you need balanced 1402 N force in both directions. If your application requires less force, the 50 mm bore provides 825 N at 0.5 MPa; if you need more, stepping up to the 80 mm bore yields 2268 N. The twin rods provide superior anti-rotation resistance compared to a single-rod SE cylinder, making it ideal for guided loads.
This SKU has no -S magnet, so it cannot host CMSE or DMSE sensors; add -S if you need position feedback. Note that a plain SED does not hold position on air loss—the piston drifts. For fail-safe holding, use a BSED rod lock. At 220 mm stroke, ensure external guides support any side loads, and leave rear-rod clearance for the protruding shaft.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED63X220 FAQ
Because the double-rod design has equal piston areas on both sides, the force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Yes, the SED63X220 is dimensionally interchangeable per ISO 15552 / VDMA 24562. Just match the 63 mm bore, 220 mm stroke, PT3/8 port, and mounting style. Note it omits FB, CA, CB, and CR mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED63X220
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.