This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUD80X75S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUD80X75S in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUD Series Double Rod Cylinder SUD80X75S
The AirTAC Airtac SUD Series Double Rod Cylinder SUD80X75S is a double-acting profile-type standard cylinder with a Ø80mm bore and 75mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUD80X75S, which matches its bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke75 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUD80X75S
About the Airtac SUD Series Double Rod Cylinder SUD80X75S
The AirTAC SUD80X75S is a discontinued double-acting double-rod profile cylinder. A rod exits both ends on one piston, meaning push and pull force are equal at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The exact drop-in replacement is the SAUD80X75S, matching the 80mm bore, 75mm stroke, 3/8" port, and mounting. The extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same bore.
The dual-rod design prevents rotation and lets the back rod carry a sensor cam for legacy CS1-B/DS1-B switches. Based on the 2268 N @0.5 MPa force, the safe working load is ~1361 N, allowing a vertical lift of ~116 kg with a 2:1 margin. Note that the air cushion only decelerates near stroke end; an external rod lock is required for load holding.
Airtac SUD Series Double Rod Cylinder SUD80X75S Technical Specifications
| Model | Airtac SUD Series Double Rod Cylinder SUD80X75S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUD80X75S |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUD80X75S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAUD80X75S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUD Series Double Rod Cylinder SUD80X75S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUD Series Double Rod Cylinder SUD80X75S Is Used
Twin-Tool Driving
Drives two separate operations simultaneously using both rod ends, ensuring perfectly synchronized motion without adding a second cylinder.
Anti-Rotation Guiding
The dual-rod geometry resists torsional twisting under offset loads, maintaining precise alignment for workpiece handling.
Cam-Driven Sensing
The rear rod extension provides a dedicated cam surface for mounting position switches without interfering with the primary work area.
Replacing the Airtac SUD Series Double Rod Cylinder SUD80X75S with the SAUD80X75S
To replace the SUD80X75S, use the SAUD80X75S drop-in, matching the bore, stroke, 3/8" port, and FA/LB mounting. The SAU replacement uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches on this -S magnet model. Size both ways by checking neighbor bores while verifying equal force both ways. A double rod is right when you need anti-rotation or must drive two tools. For stroke >=300, verify the side-load line. The cylinder does not hold loads without live air.
Replacement checklist
- ✓ Same bore / stroke → SAUD80X75S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUD Series Double Rod Cylinder SUD80X75S FAQ
Yes, the SUD80X75S is discontinued. The exact drop-in replacement is the SAUD80X75S, which matches the 80mm bore, 75mm stroke, 3/8" port, and FA/LB mounting.
Force is equal both ways at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is 3/8" with an M20x1.5 rod thread and 28mm adjustable cushions.
Related AirTAC SAU Cylinders
Request a Quote for the SAUD80X75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUD80X75S replacement — usually within 7-8 hours.