Airtac TACE Guided Compact Cylinder TACE100X10S
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X10S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke10 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE100X10S
A double acting, non-rotating compact cylinder built to ISO 21287, the TACE100X10S pairs a 100 mm bore with a 10 mm stroke and a 20 mm hard-chrome S45C rod carried on a twin-guide yoke. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight press fixtures and clamping stations where a full-length body will not go.
Plan on roughly 2356 N of usable push at 0.5 MPa, which lifts about 200 kg vertically with a 2:1 margin. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a press plate stays square without an external guide. Fixed TPU bumpers absorb end-of-stroke shock at both ends, the 1/4" port takes air filtered to 40 um, and this model carries the optional -S magnet, so CMSE / DMSE switches can be mounted for end-of-stroke sensing. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C.
Airtac TACE Guided Compact Cylinder TACE100X10S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X10S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X10S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X10S Is Used
Short-stroke weldment clamping
A 10 mm stroke and 3927 N push at 0.5 MPa clamp a steel bracket hard against a fixture in an automotive weld cell, with the twin-guide yoke keeping the clamp pad square under side load.
Compact bench press station
On a small swaging or staking bench, the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting the press head sit inside a tight guard.
Vertical part-locate platen
A packaging gantry uses the 100 mm bore to lower and seat a loaded carton with about 200 kg of vertical lift capability at a 2:1 margin, sensed at both ends by CMSE switches on the -S magnet.
Is the Airtac TACE Guided Compact Cylinder TACE100X10S the Right Cylinder?
For this force class the 100 mm bore is the top of the ACE range; if 3927 N of push at 0.5 MPa is more than the job needs, the 80 mm bore delivers 2513.3 N at the same pressure. Remember the piston drifts when air is lost, so for a held vertical load add a rod lock or pilot check valve. The 10 mm stroke is well inside the 300 mm maximum standard stroke for this bore. Order with FB flange, CA/CB clevis, CR or FTC mounting, PT ports as standard (G on request), and the female M12x1.75 rod thread on the yoke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X10S FAQ
At 0.5 MPa the 100 mm bore pushes 3927 N and pulls 3769.9 N. At 0.7 MPa push reaches 5497.8 N (pull 5277.9 N). The theoretical maximum is 800.9 kgf at 1.0 MPa. In practice, plan on about 2356 N of usable push at 0.5 MPa, roughly 200 kg of vertical lift with a 2:1 margin.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a 20 mm hard-chrome S45C rod, and fixed TPU bumpers at both ends that absorb end-of-stroke energy. Mounting options are FB flange, CA/CB clevis, CR and FTC, with a female M12x1.75 rod thread and 1/4" PT ports. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be fitted in the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.