Airtac TACE Guided Compact Cylinder TACE100X25S
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X25S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke25 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE100X25S
The TACE100X25S is a double acting, non-rotating ISO 21287 compact cylinder: a 100 mm bore pushing 3927 N (pull 3769.9 N) at 0.5 MPa through a short 25 mm stroke. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a heavy press plate or gripper stays square with no external guide. At 0.7 MPa the push rises to 5497.8 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this force class fits inside tight welding jigs and press gantries. Because this model carries the -S magnet, CMSE or DMSE reed and solid-state switches can be mounted directly on the body slots. Plan on roughly 2356 N of usable push at 0.5 MPa, and expect it to lift about 200 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy.
Airtac TACE Guided Compact Cylinder TACE100X25S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X25S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X25S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X25S Is Used
Automotive press-fit station
The 3927 N push at 0.5 MPa presses bushings into aluminium housings on a 25 mm stroke, while the twin-guide yoke keeps the punch square over the part.
Welding fixture clamping
Clamps heavy steel fixture arms in a robotic weld cell; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder inside crowded jigs.
Palletizer push-off arm
Pushes cartons off a conveyor stop with 2356 N of usable force at 0.5 MPa; the -S magnet feeds CMSE switches for end-of-stroke confirmation to the PLC.
Is the Airtac TACE Guided Compact Cylinder TACE100X25S the Right Cylinder?
Step down to the 80 mm bore (2513.3 N push at 0.5 MPa) if your load is under about 250 kgf; the 100 mm bore is the largest in the range, so nothing sits above it. Note the piston drifts if air is lost - it never holds or brakes a load - so add a rod lock or pilot check valve for a suspended weight. Mounting options are FB flange, CA/CB clevis, CR and FTC, and this -S version already includes the magnet for CMSE / DMSE switch mounting. Air must be filtered to 40 um; speed range is 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X25S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa the push reaches 5497.8 N (pull 5277.9 N). The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s. For real work, plan on about 2356 N - roughly 240 kgf - of usable push at 0.5 MPa.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and a fixed TPU bumper at both ends. The S in TACE100X25S means the magnet is fitted, so CMSE / DMSE reed or solid-state switches mount in the body slots; models ordered without -S carry no magnet. Rod thread is female M12x1.75, the port is 1/4" PT, and mounting choices are FB, CA, CB, CR and FTC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.