Airtac TACE Guided Compact Cylinder TACE100X35
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X35 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac TACE Guided Compact Cylinder TACE100X35
Built as a double acting, non-rotating compact cylinder to ISO 21287, the TACE100X35 pairs a 100 mm bore with a 35 mm stroke, a 20 mm hard-chrome-plated S45C rod and a 1/4" PT port. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push climbs to 5497.8 N, with a theoretical peak of 800.9 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a punch or press plate stays square without an external guide.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in heavy gantries and weld fixtures where every millimetre of envelope counts. A fixed TPU bumper at each end absorbs end-of-stroke shock. Plan for about 2356 N (roughly 240 kgf) of real work at 0.5 MPa, or size a vertical lift at about 200 kg with a 2:1 margin. This version ships without a magnet; order the optional -S code to enable CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE100X35 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X35 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X35
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X35 Is Used
Short-strike clinching press
A 35 mm stroke is enough to swage or mark an automotive bracket; the 100 mm bore delivers 3927 N at 0.5 MPa, and the twin-guide yoke keeps the punch square over off-centre parts.
Pallet stop under a low guard
On a packaging line the short body slots beneath a tight machine cover while lifting about 200 kg vertically with a 2:1 margin; both ports are powered, so the rod retracts under air control.
Weld fixture side clamp
Twin guide rods carry the side load of a swing-clamp arm on a car-body fixture and hold the jaw parallel without an external guide, cycling at 30-500 mm/s through the 1/4" port.
Is the Airtac TACE Guided Compact Cylinder TACE100X35 the Right Cylinder?
Next bore down is the 80 mm TACE80, which pushes 2513.3 N at 0.5 MPa; at 100 mm you are at the top of the ACE range with 3927 N. If the job needs less than about 2356 N of usable force, the 80 mm bore costs less air per cycle. When air is lost the piston drifts, so fit a rod lock or pilot check valve wherever a load must stay held. Mounting: FB flange, CA/CB clevis, CR or FTC; add the optional -S code only if CMSE / DMSE sensing is required. The 35 mm stroke sits well inside the 300 mm max standard for this bore.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X35 FAQ
At 0.5 MPa the 100 mm bore pushes 3927 N and pulls 3769.9 N. At 0.7 MPa push reaches 5497.8 N (pull 5277.9 N). The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends and FB, CA, CB, CR or FTC mounting. No magnet is fitted on this model; order the optional -S version to run CMSE or DMSE switches. Note that the piston drifts when air is lost, so add a rod lock or pilot check valve for a held load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.