Airtac TACE Guided Compact Cylinder TACE100X60S
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X60S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 60mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE100X60S
A double acting, non-rotating compact cylinder built to ISO 21287, the TACE100X60S pairs a 100 mm bore with a 60 mm stroke and twin guide rods on a yoke that stop the tooling rotating while carrying side load. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body has a roller-burnished bore for wear resistance, and the S45C piston rod is hard-chrome plated with a female M12x1.75 thread.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm bore fits tight gantries, guards and press heads where a full-length body will not. Plan for roughly 2356 N of usable push at 0.5 MPa, which lifts about 200 kg vertically with a 2:1 margin. The -S magnet this model carries accepts CMSE / DMSE reed or solid-state switches in the body slots for end-of-stroke sensing, and a fixed TPU bumper at each end absorbs stroke-end energy. Air is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi) and speed 30-500 mm/s.
Airtac TACE Guided Compact Cylinder TACE100X60S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X60S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X60S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X60S Is Used
CNC fixture clamping
Clamps a cast-iron housing against hard stops on a machining line; the 3927 N push at 0.5 MPa holds the part square through roughing cuts while the twin-guide yoke keeps the clamp plate from twisting.
Bushings press-fit station
The 60 mm stroke suits short press work, and 5497.8 N of push at 0.7 MPa seats bronze bushings into pump housings on an assembly cell without a separate press frame.
Welding-fixture gate lift
Raises and lowers a heavy clamp gate on an automotive welding fixture; with about 200 kg of vertical lift at a 2:1 margin, the 100 mm bore handles the gate weight with room to spare.
Is the Airtac TACE Guided Compact Cylinder TACE100X60S the Right Cylinder?
At 3927 N push at 0.5 MPa this 100 mm bore is the largest in the TACE range; if the load is lighter, the 80 mm bore delivers 2513.3 N under the same pressure. Air pressure alone holds the piston, so a suspended load will drift if supply is lost - add a rod lock or pilot check valve where a held position matters. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and the fitted -S magnet lets CMSE / DMSE switches report stroke end without extra hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X60S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N. At 0.7 MPa push is 5497.8 N and pull is 5277.9 N. The theoretical maximum is 800.9 kgf at 1.0 MPa. For real work, plan on about 2356 N of usable push at 0.5 MPa, roughly a 200 kg vertical lift with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs stroke-end energy. Mounting options include FB flange and CA/CB clevis. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches clamp into the body slots; without the -S code there is no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.