Airtac TACE Guided Compact Cylinder TACE100X70
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X70 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke70 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac TACE Guided Compact Cylinder TACE100X70
A double acting, non-rotating actuator in the ISO 21287 compact family, the TACE100X70 pairs a 100 mm bore with a 70 mm stroke on a 20 mm hard-chrome-plated S45C rod. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa those figures rise to 5497.8 N and 5277.9 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 70 mm unit slots into heavy presses and gantries where a full-length body will not. Air passes through a 1/4" PT port, the rod end carries a female M12x1.75 thread, and a fixed TPU bumper at each end absorbs end-of-stroke shock. In practice, plan for about 2356 N of real work at 0.5 MPa - roughly 60% of the rated push - which lifts about 200 kg vertically with a 2:1 margin.
Airtac TACE Guided Compact Cylinder TACE100X70 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X70 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X70
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X70 Is Used
Bearing press fitting
With 3927 N of push at 0.5 MPa, the twin-guide yoke presses bearings into gearbox housings on an automotive line while keeping the ram square to the bore.
Fixture clamping on CNC tables
The 70 mm stroke clamps large aluminium castings against CNC machining jigs; the non-rotating guide rods hold the clamp pad flat under side load.
Heavy slide actuation
Moves a 200 kg steel slide in a packaging machine's heavy-duty gate station, with the compact body fitting where a full-length profile cylinder cannot.
Is the Airtac TACE Guided Compact Cylinder TACE100X70 the Right Cylinder?
An 80 mm bore in this family pushes 2513.3 N at 0.5 MPa; if that covers your load, step down to save air. Nothing in the range out-pushes the 100 mm bore's 3927 N, so this is the top choice for heavy press and clamp work. The piston drifts when air is lost - it never holds or brakes a load - so fit a rod lock or pilot check valve where a suspended part must stay put. FB flange, CA/CB clevis, CR and FTC mountings are available, and the optional -S magnet code enables CMSE / DMSE switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X70 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N; at 0.7 MPa it pushes 5497.8 N and pulls 5277.9 N. The theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed runs 30-500 mm/s.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder and carries a fixed TPU bumper at both ends to absorb end-of-stroke shock. Mounting options include FB flange, CA/CB clevis, CR and FTC. For switching, order the optional -S magnet code, which allows CMSE or DMSE switches; without -S there is no magnet and no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.