Airtac TACE Guided Compact Cylinder TACE100X75
The AirTAC Airtac TACE Guided Compact Cylinder TACE100X75 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø100mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ100 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE100X75
The AirTAC TACE100X75 is a double acting, non-rotating compact cylinder built to ISO 21287: a 100 mm bore and 75 mm stroke in a hard-anodized aluminium body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 3927 N and pulls 3769.9 N.
Plan for real work rather than the full rating: about 2356 N of usable push at 0.5 MPa, which is roughly 200 kg lifted vertically with a 2:1 margin. The 20 mm S45C steel rod is hard-chrome plated and carries an M12x1.75 female thread, while the 1/4" port feeds air at 0.15-1.0 MPa (22-145 psi) across a 30-500 mm/s speed range. A fixed TPU bumper absorbs end-of-stroke energy at both ends; without the optional -S magnet code, no CMSE or DMSE switch can be mounted.
Airtac TACE Guided Compact Cylinder TACE100X75 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE100X75 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE100X75
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE100X75 Is Used
Press-fit station
Staking bushings into aluminium gearbox housings on an automated line: 3927 N of push at 0.5 MPa and a 75 mm stroke cover part loading plus the press move in one compact envelope.
Weldment clamp fixture
Clamping steel brackets in a machining fixture where the twin-guide yoke keeps the clamp plate square over the 75 mm stroke, with about 2356 N of usable force at 0.5 MPa.
Foundry lift platen
A lift-assist platen raising castings vertically: the 100 mm bore lifts about 200 kg with a 2:1 margin, and the short ISO 21287 body fits inside the guard of the transfer arm.
Is the Airtac TACE Guided Compact Cylinder TACE100X75 the Right Cylinder?
Check the force class before ordering: the smaller 80 mm bore pushes 2513.3 N at 0.5 MPa, so if your press or clamp needs more than that, the 100 mm bore at 3927 N is the right step up. Remember the piston drifts when air is lost - for a held load add a rod lock or pilot check valve. Stroke 75 mm sits well inside the 300 mm standard range for this bore, and FB flange, CA/CB clevis, CR or FTC mounting can be matched to the machine. Add the -S code if CMSE or DMSE position switches will be used.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE100X75 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3769.9 N. At 0.7 MPa those figures rise to 5497.8 N push and 5277.9 N pull. The theoretical maximum is 800.9 kgf at 1.0 MPa. A practical rule of thumb is about 2356 N of usable push at 0.5 MPa, roughly 200 kg lifted vertically with a 2:1 margin. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FB flange, CA/CB clevis, CR or FTC mounting options are available. Position sensing needs the optional -S magnet code, which enables CMSE or DMSE switches; without it no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE100X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.