Airtac TACE Guided Compact Cylinder TACE25X100
The AirTAC Airtac TACE Guided Compact Cylinder TACE25X100 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 100mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE25X100
Double acting and non-rotating, the TACE25X100 packs a 25 mm bore and 100 mm stroke into an ISO 21287 compact body, with twin guide rods on a yoke that stop the tooling rotating and carry side load. At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa those figures rise to 343.6 N push and 288.6 N pull, with a theoretical peak of 50.1 kgf at 1.0 MPa.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries where a full-length cylinder will not. A hard-anodized aluminium body runs a hard-chrome plated S45C rod, and fixed TPU bumpers absorb end-of-stroke shock at both ends. For sizing, plan on roughly 147 N of usable work at 0.5 MPa (about 60% of the push rating), which lifts about 12.5 kg vertically with a 2:1 margin. The magnet is optional: order the -S code to enable CMSE / DMSE switches, since without -S there is no magnet fitted.
Airtac TACE Guided Compact Cylinder TACE25X100 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE25X100 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE25X100
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE25X100 Is Used
Gripper actuation on electronics assembly cells
The twin-guide yoke keeps a small gripper square while it lifts PCB trays and connector housings, and the 100 mm stroke clears a full tote depth without an external guide.
Bushing press-fit in a compact pump fixture
With 245.4 N of push at 0.5 MPa, the cylinder presses nylon bushings into small pump housings, and the short ISO 21287 body drops into a jig where a longer profile cylinder cannot.
Carton stopper on a packaging conveyor
Mounted under the side rail, the 100 mm stroke raises a stop blade into the path of small cartons, while the twin guide rods stop the blade twisting under side contact.
Is the Airtac TACE Guided Compact Cylinder TACE25X100 the Right Cylinder?
Compare both directions before you commit: the 20 mm bore pushes 157.1 N at 0.5 MPa if your load is lighter, while the 32 mm bore pushes 402.1 N if you need more headroom. Remember the piston drifts when air is lost, so for a held load add a rod lock or pilot check valve rather than relying on the cylinder itself.
Mounting runs FB flange, CA/CB clevis, CR and FTC, with a female M6x1.0 rod thread and no rod-thread code on the yoke. If you need position sensing, specify the optional -S magnet so CMSE / DMSE switches can be clipped to the body.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE25X100 FAQ
At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa it pushes 343.6 N and pulls 288.6 N. The theoretical maximum is 50.1 kgf at 1.0 MPa. The bore is 25 mm with a 10 mm rod, M5x0.8 ports, a female M6x1.0 rod thread, an operating range of 0.15-1.0 MPa (22-145 psi) and speeds of 30-500 mm/s.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with fixed TPU bumpers at both ends to absorb end-of-stroke shock. Mounting options are FB, CA, CB, CR and FTC. Switches are possible only with the optional -S magnet, which lets CMSE / DMSE sensors mount on the body; without the -S code there is no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE25X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.