Airtac TACE Guided Compact Cylinder TACE25X75S
The AirTAC Airtac TACE Guided Compact Cylinder TACE25X75S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE25X75S
Built as a double acting, non-rotating compact cylinder, the TACE25X75S pairs a 25 mm bore with a 75 mm stroke, its twin guide rods on a yoke stopping tooling rotation and carrying side load. At 0.5 MPa the piston pushes 245.4 N and pulls 206.2 N; at 0.7 MPa output climbs to 343.6 N push and 288.6 N pull, with a theoretical 50.1 kgf at 1.0 MPa.
A hard-anodized aluminium body with an S45C hard-chrome rod resists wear, and the short ISO 21287 format saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. Because this model carries the -S code, the magnet is fitted and CMSE or DMSE reed or solid-state switches can be clamped anywhere along the body slots. As a working rule, count on about 147 N of real push at 0.5 MPa, which lifts roughly 12 kg vertically with a 2:1 margin.
Airtac TACE Guided Compact Cylinder TACE25X75S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE25X75S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE25X75S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE25X75S Is Used
PCB ejector on a test nest
Pushing finished circuit boards out of a test fixture on an electronics line: the 245.4 N push at 0.5 MPa is ample, and the twin-guide yoke keeps the ejector pin square to the nest without an external guide.
Carton lid hold-down
Clamping lids flat during the taping head pass on a small packaging machine. The 75 mm stroke lifts clear for loading, and the fixed TPU bumper quiets the return stroke at both ends.
Sorting conveyor stopper gate
Raising a stop blade to divert small cartons on a distribution conveyor. The short body tucks under the side frame, and the fitted -S magnet drives a CMSE switch that confirms the blade is up.
Is the Airtac TACE Guided Compact Cylinder TACE25X75S the Right Cylinder?
Size both ways before you commit: bore 16 delivers 100.5 N push at 0.5 MPa and bore 32 delivers 402.1 N, so the 25 mm suits loads that overwhelm a 16 without paying for the larger body. Air runs at 0.15-1.0 MPa (22-145 psi) with speed 30-500 mm/s. The 10 mm rod ends in a female M6x1.0 thread, the port is M5x0.8 PT, and mounting choices are FB flange, CA/CB clevis, CR and FTC. The piston drifts if air is lost, so add a rod lock or pilot check valve where a load must stay put. The fitted -S magnet means CMSE / DMSE switches are ready whenever you need position signals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE25X75S FAQ
At 0.5 MPa it pushes 245.4 N and pulls 206.2 N; at 0.7 MPa it pushes 343.6 N and pulls 288.6 N; theoretical maximum is 50.1 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure 1.5 MPa (215 psi), piston speed 30-500 mm/s, air filtered to 40 um, and a working temperature of -20 to +70 C.
It is an ISO 21287 compact cylinder: a hard-anodized aluminium body with threaded aluminium covers, a fixed TPU bumper at each end absorbing end-of-stroke energy, and a body about 50% shorter in mounting length than an ISO 15552 profile cylinder. Mounting options are FB flange, CA/CB clevis, CR and FTC. The -S magnet on this model lets CMSE or DMSE reed or solid-state switches mount in the slots along the body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE25X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.