Airtac TACE Guided Compact Cylinder TACE25X90
The AirTAC Airtac TACE Guided Compact Cylinder TACE25X90 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 90mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke90 mm
- Port sizeM5×0.8
- Acting typeDouble acting, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE25X90
The TACE25X90 is a double acting, non-rotating compact cylinder built to ISO 21287, with a 25 mm bore and a 90 mm stroke. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with speeds of 30-500 mm/s.
At 0.5 MPa this bore pushes 245.4 N and pulls 206.2 N; at 0.7 MPa it reaches 343.6 N push. Plan on roughly 147 N of usable force at 0.5 MPa, which lifts about 12 kg vertically with a 2:1 margin. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and guards, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Order the optional -S code if you need CMSE / DMSE switches; without it there is no magnet.
Airtac TACE Guided Compact Cylinder TACE25X90 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE25X90 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 90 mm |
| Acting type | Double acting, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE25X90
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE25X90 Is Used
PCB test fixture clamping
Holds a small circuit-board jig during in-circuit testing; the 245.4 N push at 0.5 MPa seats the board while the twin-guide yoke keeps the probe plate square.
Blister tray ejection
Pushes filled blister trays off a thermoforming station; the 90 mm stroke clears the tool and the compact body fits inside the guarding.
Small parcel diverting
Kicks lightweight cartons to a sort lane on a conveyor line; about 12 kg vertical-lift equivalent gives margin for friction and side load.
Is the Airtac TACE Guided Compact Cylinder TACE25X90 the Right Cylinder?
For lighter work the bore 16 TACE gives 100.5 N push at 0.5 MPa, while stepping up to bore 32 delivers 402.1 N at the same pressure. The 90 mm stroke sits inside the 150 mm standard range for this bore, so no made-to-order build is needed. The rod drifts when air is lost - for a held load add a rod lock or a pilot check valve. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and the female M6x1.0 rod thread takes standard accessory hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE25X90 FAQ
At 0.5 MPa the 25 mm bore pushes 245.4 N and pulls 206.2 N. At 0.7 MPa those figures rise to 343.6 N push and 288.6 N pull. The theoretical maximum at 1.0 MPa is 50.1 kgf. Supply air filtered to 40 um, keep working pressure at or below 1.0 MPa (145 psi), and note the proof pressure is 1.5 MPa (215 psi).
It is a hard-anodized aluminium compact body to ISO 21287, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end. Ports are M5x0.8 PT and mounting options are FB flange, CA/CB clevis, CR and FTC. Position sensing requires the optional -S magnet code: with it, CMSE / DMSE switches mount in the body slots; without it, no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE25X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.