Airtac TACE Guided Compact Cylinder TACE32X10S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X10S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X10S
Built as a double acting, non-rotating unit to ISO 21287, the TACE32X10S pairs a 32 mm bore with a short 10 mm stroke in a hard-anodized aluminium body with an S45C hard-chrome plated rod. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N and 483.8 N, with a theoretical peak of 82 kgf at 1.0 MPa.
For real-world sizing, plan on roughly 241 N of usable push at 0.5 MPa (about 60% of the rated figure), which on a vertical lift corresponds to about 20 kg with a 2:1 margin. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly in the body slots. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting it fit tight jigs, guards and gantries.
Airtac TACE Guided Compact Cylinder TACE32X10S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X10S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X10S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X10S Is Used
PCB test fixture ejection
The 10 mm stroke and 402.1 N push at 0.5 MPa eject finished boards from a test nest, while the twin-guide yoke keeps the pusher square to the fixture without extra rails.
Carton flap hold-down
Mounted under a packaging machine guard, the short ISO 21287 body presses flaps flat in a 10 mm move, and the fitted -S magnet feeds a CMSE switch to confirm each press.
Reject pusher on a filling line
Beside the conveyor, the cylinder kicks off-spec bottles at up to 500 mm/s, and a DMSE switch on the -S magnet signals the reject stroke back to the PLC.
Is the Airtac TACE Guided Compact Cylinder TACE32X10S the Right Cylinder?
With 402.1 N of push at 0.5 MPa, the 32 mm bore suits clamping and short-travel positioning of small-to-medium fixtures; drop to a 25 mm bore (245.4 N push at 0.5 MPa) for lighter loads or step up to a 40 mm bore (628.3 N) when more force is required. The 10 mm stroke sits well inside the 200 mm standard range for bore 32, so no made-to-order build is needed. If the load must stay put when air is lost, remember the piston drifts, so add a rod lock or pilot check valve. Mounting options are FB flange, CA/CB clevis, CR and FTC; the port thread is PT with G available, and the rod end carries a female M8x1.25 thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X10S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N; the theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), and speed runs 30-500 mm/s on air filtered to 40 um.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends to absorb end-of-stroke energy. Because this model carries the -S magnet, CMSE or DMSE reed and solid-state switches mount in the body slots for end-of-stroke detection. The port is 1/8" (PT thread, G optional) and the rod end has a female M8x1.25 thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.