Airtac TACE Guided Compact Cylinder TACE32X25S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X25S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X25S
This 32 mm bore TACE is a double acting, non-rotating cylinder: air drives the rod out and pulls it back, while twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or clamp plate stays square without an external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa. The -S magnet this model carries lets CMSE / DMSE reed or solid-state switches read position directly from the body slots.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries where a full-length cylinder will not. For sizing, plan on roughly 241 N of usable work at 0.5 MPa (about 0.6 of the push figure), enough to lift about 20 kg vertically with a 2:1 margin. Construction is a hard-anodized aluminium body with an S45C hard-chrome plated 12 mm rod, a female M8x1.25 rod thread, fixed TPU bumpers at both ends, air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), and a speed range of 30-500 mm/s.
Airtac TACE Guided Compact Cylinder TACE32X25S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X25S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X25S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X25S Is Used
CNC fixture clamping
Clamps aluminium brackets on a milling jig; the twin-guide yoke keeps the clamp plate square without an external guide, and 402.1 N at 0.5 MPa gives a firm, repeatable grip on each cycle.
SMT pallet stop
Stops PCB pallets on an SMT conveyor; the 25 mm stroke and about 20 kg vertical-lift capability handle light pallet loads, while the fitted -S magnet feeds position signals to a CMSE switch.
Carton squaring before taping
Squares small cartons ahead of a taping head on a packaging machine; the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits inside tight machine frames.
Is the Airtac TACE Guided Compact Cylinder TACE32X25S the Right Cylinder?
For a 25 mm stroke in this force class, bore 25 delivers 245.4 N push at 0.5 MPa and bore 40 delivers 628.3 N - step down or up to match the load instead of oversizing. The piston drifts if air is lost, so add a rod lock or pilot check valve where a held position matters. FB flange, CA/CB clevis, CR and FTC mounting cover most frames, and the fitted -S magnet pairs with CMSE / DMSE switches for end-of-stroke or mid-stroke sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X25S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa that becomes 563 N push and 483.8 N pull, with a theoretical maximum of 82 kgf at 1.0 MPa. The rod end carries a female M8x1.25 thread, the air port is 1/8" PT, and the 12 mm rod runs at 30-500 mm/s across a 0.15-1.0 MPa (22-145 psi) supply.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Mount it with FB flange, CA/CB clevis, CR or FTC hardware. Because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches clamp straight onto the body slots; without that code there is no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.