Airtac TACE Guided Compact Cylinder TACE32X35
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X35 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X35
Double acting and non-rotating, the AirTAC TACE32X35 uses twin guide rods on a yoke to stop tooling rotation and carry side load, so a gripper or plate stays square without an external guide. On a 32 mm bore and 35 mm stroke it pushes 402.1 N and pulls 345.6 N at 0.5 MPa, rising to 563 N and 483.8 N at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits tight jigs, guards and gantries. A hard-anodized aluminium body, an S45C hard-chrome rod with female M8x1.25 thread and a fixed TPU bumper at both ends round out the build. For sizing, count on roughly 241 N of usable push at 0.5 MPa - enough to lift about 20 kg vertically with a 2:1 margin.
Airtac TACE Guided Compact Cylinder TACE32X35 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X35 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X35
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X35 Is Used
Gripper actuation on assembly cells
The twin-guide yoke keeps a gripper jaw from rotating while the 402.1 N push at 0.5 MPa clamps small aluminium housings through a 35 mm stroke.
Light press-fit and staking
A short 35 mm stroke suits pressing small bearings or standoffs into plastic housings; the 563 N push at 0.7 MPa covers most light press work on a bench fixture.
CNC fixture clamping
Mounted under a milling fixture, the compact body sits where a full-length cylinder will not, holding brackets or plates square thanks to the non-rotating twin guides.
Is the Airtac TACE Guided Compact Cylinder TACE32X35 the Right Cylinder?
For lighter duty at the same stroke, a TACE25 pushes 245.4 N at 0.5 MPa; for more muscle, the TACE40 reaches 628.3 N. Keep in mind the piston drifts the moment air is lost - it never holds or brakes a load, so add a rod lock or pilot check valve wherever a held position matters. Mount with an FB flange, CA/CB clevis, CR or FTC, and order the optional -S code if CMSE / DMSE switch sensing is planned; without -S no magnet is fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X35 FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa, 563 N push and 483.8 N pull. The theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure 1.5 MPa (215 psi), and rod speed runs 30-500 mm/s on air filtered to 40 um.
Position sensing needs the optional -S magnet code - without it no magnet is fitted and no CMSE or DMSE switch will read. Mountings are FB flange, CA/CB clevis, CR and FTC. The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.