Airtac TACE Guided Compact Cylinder TACE32X35S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X35S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X35S
The AirTAC TACE32X35S is a double acting, non-rotating compact cylinder built to ISO 21287: a 32 mm bore drives a 12 mm hard-chrome S45C rod over a 35 mm stroke, while twin guide rods on a yoke stop the tooling rotating and carry side load without any external guide. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures reach 563 N and 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries where a full-length cylinder will not.
For sizing, plan real work around roughly 241 N at 0.5 MPa (about 0.6 of the push force), which is the vertical equivalent of lifting about 20 kg with a 2:1 margin - comfortable headroom for a 12 kg fixture plate. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches mount straight into the body slots. Air filtered to 40 um, pressure 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, speed 30-500 mm/s, and a fixed TPU bumper at both ends absorbs end-of-stroke shock. The rod end carries a female M8x1.25 thread and the port is 1/8" PT.
Airtac TACE Guided Compact Cylinder TACE32X35S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X35S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X35S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X35S Is Used
Drill-jig clamp for aluminium brackets
The 35 mm stroke clamps a machined bracket into a CNC drill jig, with about 241 N of usable force at 0.5 MPa holding the part square while the twin-guide yoke resists the side thrust of the cutting bit.
Gripper on a bottling-line pick head
Mounted on a small pick-and-place gantry, the non-rotating twin guide rods keep the gripper jaws aligned bottle after bottle, and the fitted -S magnet feeds CMSE switch signals back to the PLC at each end position.
Reject pusher on a carton line
A short kick of 35 mm sweeps misprinted cartons off a packaging conveyor at up to 500 mm/s, and the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder beside the belt guard.
Is the Airtac TACE Guided Compact Cylinder TACE32X35S the Right Cylinder?
Step down to a 25 mm bore (245.4 N push at 0.5 MPa) if the load is light and space is critical, or step up to a 40 mm bore (628.3 N push at 0.5 MPa) when clamping forces climb past 300 N. Remember that this cylinder does not hold position if air is lost - the piston drifts - so add a rod lock or pilot check valve for a held load. Mounting choices are FB flange, CA/CB clevis, CR and FTC, and since the -S magnet is fitted on this model, CMSE / DMSE switches can be added at any point along the stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X35S FAQ
At 0.5 MPa the 32 mm bore pushes 402.1 N and pulls 345.6 N; at 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum is 82 kgf at 1.0 MPa, which is about 41 kg of vertical lift - plan on roughly 20 kg with a 2:1 margin. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Mount via FB flange, CA/CB clevis, CR or FTC; the rod end has a female M8x1.25 thread and the air port is 1/8" PT. A fixed TPU bumper at each end absorbs end-of-stroke shock but is not adjustable and never locks a load - use a rod lock or pilot check valve for that. The -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.