Airtac TACE Guided Compact Cylinder TACE32X70S
The AirTAC Airtac TACE Guided Compact Cylinder TACE32X70S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE32X70S
The TACE32X70S is a double acting, non-rotating compact cylinder built to ISO 21287: a 32 mm bore with a 70 mm stroke in a hard-anodized aluminium body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantry frames. Twin guide rods on a yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide.
At 0.5 MPa this bore pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push reaches 563 N, with a theoretical 82 kgf at 1.0 MPa. Plan on roughly 241 N of real work at 0.5 MPa (about 60% of the push figure), which lifts about 20 kg vertically with a 2:1 margin. Because this model carries the -S code the magnet is fitted, so CMSE / DMSE switches can be mounted directly; a fixed TPU bumper at each end absorbs end-of-stroke energy and speed spans 30-500 mm/s.
Airtac TACE Guided Compact Cylinder TACE32X70S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE32X70S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE32X70S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE32X70S Is Used
CNC fixture clamping
Clamps aluminium housings in a machining fixture: 402.1 N push at 0.5 MPa holds the part square while the twin-guide yoke stops the clamp strap rotating under load.
Packaging reject pusher
Kicks mislabelled cartons off a conveyor at 30-500 mm/s; the 70 mm stroke clears the belt edge and the compact body fits under the guarding frame.
Electronics test press
Presses connector boards into a test nest with about 241 N of usable force at 0.5 MPa; CMSE switches (magnet fitted on this -S model) confirm full seat each cycle.
Is the Airtac TACE Guided Compact Cylinder TACE32X70S the Right Cylinder?
For lighter clamping the bore 25 TACE pushes 245.4 N at 0.5 MPa; for roughly 56% more force step up to bore 40 at 628.3 N. The 32 mm sits in the middle with 402.1 N push and a 70 mm stroke that is well inside the 200 mm maximum standard stroke for this bore. Remember the piston drifts if air is lost - for a held load add a rod lock or pilot check valve. Mount with FB flange, CA/CB clevis, CR or FTC; the 1/8" PT port and female M8x1.25 rod thread suit standard fittings, and the fitted -S magnet lets CMSE / DMSE switches report position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE32X70S FAQ
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa push rises to 563 N with 483.8 N pull. Theoretical maximum is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Mounting choices are FB flange, CA/CB clevis, CR or FTC. This model carries the -S magnet, so CMSE / DMSE reed or solid-state switches can be fitted along the body slots. The rod end is a female M8x1.25 thread, the port is 1/8" PT, and a fixed TPU bumper sits at both ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE32X70S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.