Airtac TACE Guided Compact Cylinder TACE63X15
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X15 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X15
The TACE63X15 is double acting: air drives the rod out and pulls it back, with a fixed TPU bumper at each end absorbing the stop. Its 63 mm bore delivers 1558.6 N of push and 1458.1 N of pull at 0.5 MPa, rising to 2182.1 N of push at 0.7 MPa. Twin guide rods carried on a yoke keep the tooling from rotating and take side load, so a gripper or press plate stays square without an external guide. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight fixtures and guarded stations a full-length cylinder cannot fit.
Build quality matches the rating: a roller-burnished, hard-anodized aluminium-alloy body, an S45C piston rod with hard-chrome plating, and threaded aluminium covers for fast service. The 1/8" port and the M10x1.5 female rod thread are fixed on this yoke version. At 0.5 MPa, plan on roughly 935 N of usable push rather than the full 1558.6 N rating; with a 2:1 margin that equals lifting about 79 kg vertically, so match real part weight against that figure. If you need position sensing, order the optional -S magnet code, since without it no magnet is fitted and no CMSE or DMSE switch can be read.
Airtac TACE Guided Compact Cylinder TACE63X15 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X15 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X15
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X15 Is Used
Bushings press-fit into pump housings
A 15 mm stroke is the classic press-in move: seat a sintered bushing into an aluminium pump housing on an assembly line, using about 935 N of usable push at 0.5 MPa to reach the shoulder without slamming.
Fixture clamping on a CNC machining center
Clamp a gearbox casting sideways in a 4th-axis fixture: the twin-guide yoke keeps the clamp pad square under side load, and the compact body tucks inside the fixture where a full-profile cylinder would collide.
Short-stroke ejection from a stamping die
Eject a finished bracket out of a shallow die cavity at up to 500 mm/s; the TPU bumpers take the end-of-stroke shock on every cycle of a high-rate press feed.
Is the Airtac TACE Guided Compact Cylinder TACE63X15 the Right Cylinder?
Size by force: if your job needs less than about 981.7 N of push at 0.5 MPa, the 50 mm bore is the cheaper pick; if you need more than 1558.6 N, step up to the 80 mm bore at 2513.3 N. The 15 mm stroke suits short clamp, press and eject moves and sits well inside the 250 mm maximum standard stroke for this bore, so it is a standard catalog item. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve for a held load. Mount with FB flange, CA/CB clevis, CR or FTC feet, and specify the optional -S magnet only if CMSE or DMSE switches are in your plan.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X15 FAQ
At 0.5 MPa it pushes with 1558.6 N and pulls with 1458.1 N. At 0.7 MPa those figures rise to 2182.1 N push and 2041.3 N pull. The theoretical maximum at 1.0 MPa is 317.9 kgf. For sizing, treat roughly 935 N as the usable push at 0.5 MPa, which corresponds to lifting about 79 kg vertically with a 2:1 margin.
It is built to ISO 21287 with a hard-anodized aluminium body, so the mounting length is about 50% shorter than an ISO 15552 profile cylinder of the same bore. A fixed TPU bumper at each end absorbs the stop, and mounting options are FB flange, CA/CB clevis, CR and FTC. Position sensing requires the optional -S magnet code; only then can CMSE or DMSE switches be mounted on the body's magnet slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.