Airtac TACE Guided Compact Cylinder TACE63X25
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X25 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X25
A 63 mm piston in the ISO 21287 compact format makes the TACE63X25 a double acting, non-rotating cylinder: air extends and retracts the 16 mm hard-chrome rod, while twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, which is why this bore fits tight jigs, guards and gantries. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those figures rise to 2182.1 N and 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa.
For real work, plan on roughly 935 N of usable push at 0.5 MPa (about 0.6 of the rated force), which lifts a 79 kg part vertically with a 2:1 margin. The rod ends in a female M10x1.5 thread, air supply is via 1/8" PT ports, speed runs 30-500 mm/s, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, -20 to +70 C, on air filtered to 40 um. No magnet is fitted as supplied; order the optional -S code to enable CMSE / DMSE switches.
Airtac TACE Guided Compact Cylinder TACE63X25 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X25 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X25
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X25 Is Used
Bearing press station
Pressing small bearings or bushings into pump and gearbox housings on an assembly line; the 1558.6 N push at 0.5 MPa covers light interference fits and the 25 mm stroke keeps the press head travel short.
CNC fixture clamping
Clamping aluminium gear housings on a machining-center fixture; the twin-guide yoke holds the clamp plate square over the part, and the short ISO 21287 body fits inside the fixture envelope where a longer cylinder will not.
Nest ejection on a packaging line
Kicking finished cartons or blisters out of a conveyor nest; about 935 N of usable push clears the part quickly at 30-500 mm/s, and the female M10x1.5 rod thread takes a pusher plate directly.
Is the Airtac TACE Guided Compact Cylinder TACE63X25 the Right Cylinder?
Size by force: the 50 mm bore pushes 981.7 N at 0.5 MPa if your press or clamp needs less, while the 80 mm bore delivers 2513.3 N for heavier pressing. The 25 mm stroke suits short-travel work like pressing, clamping and ejection. If the load must stay put when air is lost, add a rod lock or pilot check valve, because the piston drifts without air. Mount with FB flange, CA/CB clevis, CR or FTC; add the optional -S magnet in the order code if you want CMSE / DMSE switch feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X25 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N; the theoretical maximum is 317.9 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) air (proof 1.5 MPa / 215 psi) at 30-500 mm/s, with a 63 mm bore, 25 mm stroke, 16 mm rod and 1/8" PT ports.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB, CA, CB, CR or FTC mounting options. Sensors are possible only with the optional -S magnet code, which allows CMSE / DMSE switches; without -S no magnet is fitted, so confirm your sensing needs before ordering.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.